SMJ320C80GFM50
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Surface Mount | NO |
| Number of Pins | 305 |
| Number of Terminations | 305 |
| ECCN Code | 3A001.A.2.C |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| HTS Code | 8542.31.00.01 |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | PERPENDICULAR |
| Terminal Form | PIN/PEG |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 305 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.465V |
| Temperature Grade | MILITARY |
| RAM Size | 50kB |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, OTHER |
| Supply Current-Max | 2500mA |
| Bit Size | 32 |
| Frequency (Max) | 50MHz |
| Data Bus Width | 32b |
| ROM (words) | 2.4G |
| Boundary Scan | YES |
| Low Power Mode | NO |
| Screening Level | MIL-PRF-38535 |
| Format | FLOATING POINT |
| Integrated Cache | YES |
| RAM (words) | 51200 |
| Number of Timers | 3 |
| Number of External Interrupts | 4 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Number of DMA Channels | 1 |
| Height | 5.59mm |
| Length | 47.25mm |
| Width | 47.25mm |
| Thickness | 3.3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SMJ320C80GFM50 Overview
305 terminations are available for its use.The voltage supplied by 3.3V is used to operate it.Pins are located on the 305 component.The configuration of the device includes 305 pins.On the basis of its specific characteristics, this device can be classified as a Digital Signal Processors device.The device operates on a voltage of 3.3V as its supply voltage.DIGITAL SIGNAL PROCESSOR, OTHER is used as the uPs/uCs/peripheral IC type.A lower operating temperature than 125°C is recommended.It is recommended that the operating temperature exceeds -55°C.In industrial settings, 3 timers provide accurate feedback and event activation.An external source is causing 4 interrupts.Its maximum frequency should be kept below 50MHz.For data transfer, 1 DMA channels are available without overloading the CPU.
SMJ320C80GFM50 Features
Operating supply voltage of 3.3V
DIGITAL SIGNAL PROCESSOR, OTHER as uPs/uCs/Peripheral Ics
4 external interrupts
SMJ320C80GFM50 Applications
There are a lot of Texas Instruments SMJ320C80GFM50 DSP applications.
- Fourier transform
- Medical imaging
- Instrument modeling
- Machinery and equipment
- Tomography technology
- Boats
- Real-time effects
- Finite impulse response digital filters
- Tomography technology
- TVs
