SN65LVDS250DBTG4
| Parameters | |
|---|---|
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Output | SEPARATE OUTPUT |
| Pin Count | 38 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 4 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Analog IC - Other Type | CROSS POINT SWITCH |
| Data Rate | 2.5 Gbps |
| Supply Type | Single |
| Supply Current-Max (Isup) | 27mA |
| Independent Circuits | 1 |
| Switch-on Time-Max | 300ns |
| Switch-off Time-Max | 6ns |
| Height | 1.15mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Package / Case | TSSOP |
| Surface Mount | YES |
| Number of Pins | 38 |
| Weight | 120.003531mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 38 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Multiplexer or Switches |
SN65LVDS250DBTG4 Overview
Due to the fact that it is provided in the TSSOP, digital switch allows the board to be compacted.Rail/Tube is the method used for packaging.Among its basic features are 38 terminations.The multiplexer's system is powered by 3.3V volts.Currently, this turn signal switch has a total of 38 component pins.It employs GULL WING as the point at which conductors come to an end.The supply type of this multiplexer ic is Single.Currently, it is configured with a 38 pin configuration.The digital switch ic is a part of an electronic system classified as Multiplexer or Switches.It is possible to achieve reliable performance of the multiplexers with a voltage supply of 3.3V.The turn signal switch's circuit has 4 transmission channels.In this case, operating this signal switch at 85°C is acceptable.Ideally, the temperature of the multiplexer should not exceed -40°C.Upon compliance with the applicable device specifications, the device will operate at the maximum supply voltage of 3.6V.Typical device specifications specify a voltage supply of 3V for the digital swith.It employs CROSS POINT SWITCH as its analog IC.
SN65LVDS250DBTG4 Features
Supplied in the TSSOP package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
CROSS POINT SWITCH as the analog IC
SN65LVDS250DBTG4 Applications
There are a lot of Texas Instruments SN65LVDS250DBTG4 Signal Switches / Multiplexers / Decoders applications.
- High-performance memory-decoding applications
- VGA
- War field flying robot with a night vision flying camera
- CPU memory location identification
- Computer memory
- Data bus control
- Logic circuits
- Make half adder
- Small scale TV wall
- A/D converters
