SN74ABT374ADBR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 156.687814mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74ABT374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 8 |
| Clock Frequency | 200MHz |
| Propagation Delay | 6.6 ns |
| Turn On Delay Time | 4.2 ns |
| Family | ABT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 250μA |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 6.6ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ABT374ADBR Overview
The flip flop is packaged in a case of 20-SSOP (0.209, 5.30mm Width). It is contained within the Cut Tape (CT)package. As configured, the output uses Tri-State, Non-Inverted. It is configured with a trigger that uses Positive Edge. The electronic part is mounted in the way of Surface Mount. The supply voltage is set to 4.5V~5.5V. The operating temperature is -40°C~85°C TA. This electronic flip flop is of type D-Type. The FPGA belongs to the 74ABT series. A frequency of 200MHzshould be the maximum output frequency. A total of 1elements are present in it. T flip flop consumes 250μA quiescent energy. Terminations are 20. If you search by 74ABT374, you will find similar parts. It is powered by a voltage of 5V . Input capacitance of this device is 3.5pF farads. It belongs to the family of electronic devices known as ABT. Electronic part Surface Mountis mounted in the way. This board is designed with 20pins on it. It has a clock edge trigger type of Positive Edge. This RS flip flops is a part number FF/Latches. The design is based on 8bits. Its flexibility is enhanced by 8 circuits. Considering the reliability of this T flip flop, it is well suited for TR. It runs on 5Vvolts of power. The D flip flop is embedded with 2ports. For high efficiency, the supply voltage should be set to 5V. Its output current of 64mAallows for maximum design flexibility. In order for the chip to function, it has 3output lines.
SN74ABT374ADBR Features
Cut Tape (CT) package
74ABT series
20 pins
8 Bits
5V power supplies
SN74ABT374ADBR Applications
There are a lot of Texas Instruments SN74ABT374ADBR Flip Flops applications.
- Single Up Count-Control Line
- Communications
- Latch
- Pattern generators
- Differential Individual
- Digital electronics systems
- Computing
- Buffer registers
- High Performance Logic for test systems
- Cold spare funcion
