SN74ABT374ADWRE4
| Parameters | |
|---|---|
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 8 |
| Clock Frequency | 200MHz |
| Propagation Delay | 7.1 ns |
| Turn On Delay Time | 4.2 ns |
| Family | ABT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 250μA |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 6.6ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceiver |
| Packing Method | TR |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74ABT374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
SN74ABT374ADWRE4 Overview
The package is in the form of 20-SOIC (0.295, 7.50mm Width). There is an embedded version in the package Tape & Reel (TR). Currently, the output is configured to use Tri-State, Non-Inverted. JK flip flop uses Positive Edgeas the trigger. It is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. It is operating at -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. JK flip flop belongs to the 74ABTseries of FPGAs. Its output frequency should not exceed 200MHz. D latch consists of 1 elements. As a result, it consumes 250μA quiescent current and is not affected by external forces. A total of 20terminations have been recorded. The 74ABT374 family contains this object. A voltage of 5V provides power to the D latch. Its input capacitance is 3.5pF farads. In terms of electronic devices, this device belongs to the ABTfamily of devices. There is an electronic part that is mounted in the way of Surface Mount. It is designed with 20 pins. It has a clock edge trigger type of Positive Edge. This device has the base part number Bus Driver/Transceiver. The design is based on 8bits. The superior flexibility of this product is achieved by using 8 circuits. On the basis of its reliable performance, this D flip flop is well suited for use with TR. The D latch operates on 5V volts. This flip flop has a total of 2ports. The supply voltage should be maintained at 5V for high efficiency. Its output current of 64mAallows for maximum design flexibility. There are no output lines on the JK flip flop.
SN74ABT374ADWRE4 Features
Tape & Reel (TR) package
74ABT series
20 pins
8 Bits
5V power supplies
SN74ABT374ADWRE4 Applications
There are a lot of Texas Instruments SN74ABT374ADWRE4 Flip Flops applications.
- Bounce elimination switch
- ESCC
- Consumer
- Computing
- Divide a clock signal by 2 or 4
- Differential Individual
- Digital electronics systems
- Single Up Count-Control Line
- Latch-up performance
- Bus hold
