SN74ABT374ADWRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74ABT374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 8 |
| Clock Frequency | 200MHz |
| Propagation Delay | 6.6 ns |
| Turn On Delay Time | 4.2 ns |
| Family | ABT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 250μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 6.6ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Power Supply Current-Max (ICC) | 30mA |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ABT374ADWRG4 Overview
In the form of 20-SOIC (0.295, 7.50mm Width), it has been packaged. It is included in the package Tape & Reel (TR). There is a Tri-State, Non-Invertedoutput configured with it. It is configured with a trigger that uses a value of Positive Edge. Surface Mountis positioned in the way of this electronic part. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. It is operating at -40°C~85°C TA. This D latch has the type D-Type. JK flip flop belongs to the 74ABTseries of FPGAs. Its output frequency should not exceed 200MHz. A total of 1elements are contained within it. Despite external influences, it consumes 250μAof quiescent current. Currently, there are 20 terminations. It is a member of the 74ABT374 family. The D flip flop is powered by a voltage of 5V . Its input capacitance is 3.5pF farads. The electronic device belongs to the ABTfamily. The electronic part is mounted in the way of Surface Mount. This board is designed with 20pins on it. This device's clock edge trigger type is Positive Edge. This RS flip flops is a part number FF/Latches. Flip flops designed with 8bits are used in this part. Due to its superior flexibility, it uses 8 circuits. This D flip flop is well suited for TR based on its reliable performance. It operates from 5V power supplies. The flip flop contains 2ports. For high efficiency, the supply voltage should be kept at 5V. The output current of 64mA makes it feature maximum design flexibility.
SN74ABT374ADWRG4 Features
Tape & Reel (TR) package
74ABT series
20 pins
8 Bits
5V power supplies
SN74ABT374ADWRG4 Applications
There are a lot of Texas Instruments SN74ABT374ADWRG4 Flip Flops applications.
- Data transfer
- Storage registers
- Data Synchronizers
- Frequency Dividers
- Pattern generators
- Patented noise
- Functionally equivalent to the MC10/100EL29
- Convert a momentary switch to a toggle switch
- Memory
- Common Clocks
