SN74ABT377AN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Weight | 1.1991g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | WITH HOLD MODE |
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | 74ABT377 |
| Function | Standard |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Output Current | 64mA |
| Number of Bits | 8 |
| Clock Frequency | 150MHz |
| Propagation Delay | 6.8 ns |
| Turn On Delay Time | 4.5 ns |
| Family | ABT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 250μA |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 6.8ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 7.3 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Power Supply Current-Max (ICC) | 30mA |
| Clock Edge Trigger Type | Positive Edge |
| Height | 5.08mm |
| Length | 24.33mm |
| Width | 6.35mm |
| Thickness | 4.57mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ABT377AN Overview
20-DIP (0.300, 7.62mm)is the packaging method. The Tubepackage contains it. The output it is configured with uses Non-Inverted. It is configured with a trigger that uses Positive Edge. The electronic part is mounted in the way of Through Hole. A voltage of 4.5V~5.5Vis used as the supply voltage. Currently, the operating temperature is -40°C~85°C TA. A flip flop of this type is classified as a D-Type. In this case, it is a type of FPGA belonging to the 74ABT series. A frequency of 150MHzshould not be exceeded by its output. The element count is 1 . It consumes 250μA of quiescent There are 20 terminations,JK flip flop belongs to 74ABT377 family. The power source is powered by 5V. Its input capacitance is 3.5pFfarads. Devices in the ABTfamily are electronic devices. It is mounted in the way of Through Hole. This board has 20 pins. This device's clock edge trigger type is Positive Edge. The RS flip flops belongs to FF/Latches base part number. There are 8bits in its design. In order to achieve its superior flexibility, 8 circuits are used. The power supply is 5V. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. With a current output of 64mA , it offers maximum design flexibility. Additionally, there are WITH HOLD MODE on the electronic flip flop that can be referred to.
SN74ABT377AN Features
Tube package
74ABT series
20 pins
8 Bits
5V power supplies
SN74ABT377AN Applications
There are a lot of Texas Instruments SN74ABT377AN Flip Flops applications.
- Communications
- Load Control
- Guaranteed simultaneous switching noise level
- Common Clocks
- Data storage
- Cold spare funcion
- Frequency Dividers
- Count Modes
- Buffered Clock
- CMOS Process
