SN74ABT534AN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Weight | 1.1991g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ABT534 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 8 |
| Clock Frequency | 175MHz |
| Propagation Delay | 6.7 ns |
| Turn On Delay Time | 4.5 ns |
| Family | ABT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 250μA |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 6.7ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 7.6 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Height | 5.08mm |
| Length | 24.33mm |
| Width | 6.35mm |
| Thickness | 4.57mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ABT534AN Overview
The item is packaged in 20-DIP (0.300, 7.62mm)cases. As part of the package Tube, it is embedded. As configured, the output uses Tri-State, Inverted. JK flip flop uses Positive Edgeas the trigger. This electronic part is mounted in the way of Through Hole. A supply voltage of 4.5V~5.5V is required for operation. A temperature of -40°C~85°C TAis considered to be the operating temperature. The type of this D latch is D-Type. In FPGA terms, D flip flop is a type of 74ABTseries FPGA. In order for it to function properly, its output frequency should not exceed 175MHz. In total, it contains 1 elements. There is 250μA quiescent consumption. The number of terminations is 20. If you search by 74ABT534, you will find similar parts. The power source is powered by 5V. A JK flip flop with a 3.5pFfarad input capacitance is used here. In terms of electronic devices, this device belongs to the ABTfamily of devices. Electronic part Through Holeis mounted in the way. With its 20pins, it is designed to work with most electronic flip flops. This device's clock edge trigger type is Positive Edge. The RS flip flops belongs to FF/Latches base part number. There are 8bits in this flip flop. 8 circuits are used to achieve its superior flexibility. A power supply of 5Vis required to operate it. The flip flop has 2embedded ports. For high efficiency, the supply voltage should be kept at 5V. With an output current of 64mA, this device offers maximum design flexibility. There are no output lines on the JK flip flop.
SN74ABT534AN Features
Tube package
74ABT series
20 pins
8 Bits
5V power supplies
SN74ABT534AN Applications
There are a lot of Texas Instruments SN74ABT534AN Flip Flops applications.
- ESD protection
- Latch-up performance
- Common Clocks
- Load Control
- Matched Rise and Fall
- Balanced 24 mA output drivers
- Supports Live Insertion
- Computers
- Balanced Propagation Delays
- Control circuits
