SN74ABT821ADWRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ABT821 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 10 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 10 |
| Clock Frequency | 125MHz |
| Propagation Delay | 6.2 ns |
| Turn On Delay Time | 4.1 ns |
| Family | ABT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 250μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 6.2ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 6.7 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Power Supply Current-Max (ICC) | 38mA |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Height | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ABT821ADWRG4 Overview
As a result, it is packaged as 24-SOIC (0.295, 7.50mm Width). D flip flop is embedded in the Tape & Reel (TR) package. This output is configured with Tri-State, Non-Inverted. It is configured with a trigger that uses Positive Edge. It is mounted in the way of Surface Mount. A supply voltage of 4.5V~5.5V is required for operation. It is operating at -40°C~85°C TA. This electronic flip flop is of type D-Type. JK flip flop belongs to the 74ABTseries of FPGAs. This D flip flop should not have a frequency greater than 125MHz. D latch consists of 1 elements. It consumes 250μA of quiescent In 24terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. Members of the 74ABT821family make up this object. The D flip flop is powered by a voltage of 5V . The input capacitance of this T flip flop is 3.5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. This D flip flop belongs to the family of ABT. It is mounted in the way of Surface Mount. This board is designed with 24pins on it. This device has the clock edge trigger type of Positive Edge. It is included in FF/Latches. It is designed with 10bits. The superior flexibility of this circuit is achieved by using 10 circuits. This D flip flop is well suited for TR based on its reliable performance. It operates from 5V power supplies. A total of 2ports are embedded in the D flip flop. For high efficiency, the supply voltage should be kept at 5V. The output current of 64mA makes it feature maximum design flexibility.
SN74ABT821ADWRG4 Features
Tape & Reel (TR) package
74ABT series
24 pins
10 Bits
5V power supplies
SN74ABT821ADWRG4 Applications
There are a lot of Texas Instruments SN74ABT821ADWRG4 Flip Flops applications.
- Shift Registers
- Consumer
- Registers
- CMOS Process
- Memory
- Bounce elimination switch
- Event Detectors
- ESD performance
- Modulo – n – counter
- Frequency division
