SN74ABT823DBRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | WITH CLEAR AND CLOCK ENABLE |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74ABT823 |
| Function | Master Reset |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 9 |
| Clock Frequency | 200MHz |
| Propagation Delay | 6.1 ns |
| Turn On Delay Time | 4.3 ns |
| Family | ABT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 250μA |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 6.1ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 6.8 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Input Lines | 9 |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Height | 2mm |
| Length | 8.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ABT823DBRG4 Overview
As a result, it is packaged as 24-SSOP (0.209, 5.30mm Width). A package named Tape & Reel (TR)includes it. The output it is configured with uses Tri-State, Non-Inverted. This trigger is configured to use Positive Edge. Surface Mountis in the way of this electric part. A voltage of 4.5V~5.5Vis used as the supply voltage. Temperature is set to -40°C~85°C TA. D-Typedescribes this flip flop. In FPGA terms, D flip flop is a type of 74ABTseries FPGA. Its output frequency should not exceed 200MHz. In total, it contains 1 elements. T flip flop consumes 250μA quiescent energy. A total of 24 terminations have been made. You can search similar parts based on 74ABT823. Power is supplied from a voltage of 5V volts. Its input capacitance is 4pFfarads. ABTis the family of this D flip flop. This electronic part is mounted in the way of Surface Mount. A total of 24pins are provided on this board. It has a clock edge trigger type of Positive Edge. This RS flip flops is a part number FF/Latches. Flip flops designed with 9bits are used in this part. As a result of its reliable performance, this T flip flop is suitable for TR. The power supply is 5V. This D flip flop is equipped with 0 ports. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. As a result of its output current of 64mA, it is very flexible in terms of design. There are 3 output lines on it. 9input lines are available for you to choose from. It is also characterized by WITH CLEAR AND CLOCK ENABLE.
SN74ABT823DBRG4 Features
Tape & Reel (TR) package
74ABT series
24 pins
9 Bits
5V power supplies
SN74ABT823DBRG4 Applications
There are a lot of Texas Instruments SN74ABT823DBRG4 Flip Flops applications.
- Storage registers
- Counters
- Guaranteed simultaneous switching noise level
- CMOS Process
- Digital electronics systems
- Matched Rise and Fall
- Safety Clamp
- ESD protection
- Bus hold
- Registers
