SN74AC533PWR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74AC |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74AC533 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 2 ns |
| Family | AC |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Number of Input Lines | 3 |
| Independent Circuits | 1 |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AC533PWR Overview
In the 20-TSSOP (0.173, 4.40mm Width) package, it is embedded. The package is in the form of Cut Tape (CT). It uses Tri-State as the output. This electrical device has a logic type of D-Type Transparent Latch. The electronic component is mounted according to the Surface Mount method. There is no supply voltage for this device. There is a temperature of -40°C~85°C at which the system operates. This FPGA is part of the 74AC series. 8 Bits are used in the design of this electronic part. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. 74AC533 is its family. The device works with a voltage of 3.3V for its supply voltage. There are 20 pins attached to it. This electronic device belongs to the family of AC. In addition, it is designed with a pin number of 20. Surface Mount is used to mount this electronic part. In this device, there is a total of 2 ports available for use. This part is included in FF/Latches. It reaches a maximum supply voltage (Vsup) of 6V. (Vsup) should be greater than 2V. There are 3 input lines in which electronic circuits are present. This device is well suited for TAPE AND REEL based on its reliable performance. Its 24mA output current allows for maximum design flexibility.
SN74AC533PWR Features
20-TSSOP (0.173, 4.40mm Width) package
74AC series
8 Bits
74AC533 family
20 pin count
20 pins
SN74AC533PWR Applications
There are a lot of Texas Instruments SN74AC533PWR Latches applications.
- Communication systems
- Frequency
- Watches
- Phase comparator
- TV Set-top Boxes
- Serial Output Register
- Serial Input
- Counter
- Network Switches
- Accumulator Registers
