Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-SOIC (0.295, 7.50mm Width) |
Number of Pins |
20 |
Weight |
500.709277mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
Series |
74AC |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
Type |
D-Type |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Additional Feature |
BROADSIDE VERSION OF 534 |
Subcategory |
FF/Latches |
Technology |
CMOS |
Voltage - Supply |
2V~6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Supply Voltage |
3.3V |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
74AC564 |
Function |
Standard |
Qualification Status |
Not Qualified |
Output Type |
Tri-State, Inverted |
Number of Elements |
1 |
Polarity |
Inverting |
Supply Voltage-Max (Vsup) |
6V |
Power Supplies |
3.3/5V |
Supply Voltage-Min (Vsup) |
2V |
Number of Circuits |
8 |
Load Capacitance |
50pF |
Number of Ports |
2 |
Output Current |
24mA |
Number of Bits |
8 |
Clock Frequency |
95MHz |
Propagation Delay |
14 ns |
Turn On Delay Time |
4.9 ns |
Family |
AC |
Logic Function |
D-Type, Flip-Flop |
Current - Quiescent (Iq) |
4μA |
Output Characteristics |
3-STATE |
Current - Output High, Low |
24mA 24mA |
Max I(ol) |
0.024 A |
Max Propagation Delay @ V, Max CL |
10.5ns @ 5V, 50pF |
Trigger Type |
Positive Edge |
Input Capacitance |
4.5pF |
Power Supply Current-Max (ICC) |
0.04mA |
Count Direction |
UNIDIRECTIONAL |
Clock Edge Trigger Type |
Positive Edge |
Translation |
N/A |
Height |
2.65mm |
Length |
12.8mm |
Width |
7.5mm |
Thickness |
2.35mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74AC564DWG4 Overview
The flip flop is packaged in a case of 20-SOIC (0.295, 7.50mm Width). D flip flop is embedded in the Tube package. There is a Tri-State, Invertedoutput configured with it. It is configured with the trigger Positive Edge. Surface Mountis positioned in the way of this electronic part. Powered by a 2V~6Vvolt supply, it operates as follows. It is at -40°C~85°C TAdegrees Celsius that the system is operating. This electronic flip flop is of type D-Type. This type of FPGA is a part of the 74AC series. In order for it to function properly, its output frequency should not exceed 95MHz. A total of 1 elements are present. There is 4μA quiescent consumption. It has been determined that there have been 20 terminations. Members of the 74AC564family make up this object. A voltage of 3.3V is used as the power supply for this D latch. JK flip flop input capacitance is 4.5pF farads. Devices in the ACfamily are electronic devices. The electronic part is mounted in the way of Surface Mount. It is designed with 20 pins. There is a clock edge trigger type of Positive Edgeon this device. There is a FF/Latchesbase part number assigned to the RS flip flops. 8bits are used in its design. The maximal supply voltage (Vsup) reaches 6V. It is imperative that the supply voltage (Vsup) is maintained above 2Vin order to ensure normal operation. Despite its superior flexibility, it relies on 8 circuits to achieve it. It operates from 3.3/5V power supplies. The flip flop has 2embedded ports. With an output current of 24mA, this device offers maximum design flexibility. Additionally, you may refer to the additional BROADSIDE VERSION OF 534 of the electronic flip flop.
SN74AC564DWG4 Features
Tube package
74AC series
20 pins
8 Bits
3.3/5V power supplies
SN74AC564DWG4 Applications
There are a lot of Texas Instruments SN74AC564DWG4 Flip Flops applications.
- Single Down Count-Control Line
- Common Clocks
- Patented noise
- Control circuits
- Frequency division
- Frequency Divider circuits
- Modulo – n – counter
- Registers
- Parallel data storage
- Communications