SN74AC574NSR
| Parameters | |
|---|---|
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AC574 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 153MHz |
| Propagation Delay | 13.5 ns |
| Turn On Delay Time | 6 ns |
| Family | AC |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 9.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Number of Input Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 60000000Hz |
| Height Seated (Max) | 2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 266.712314mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AC |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
SN74AC574NSR Overview
20-SOIC (0.209, 5.30mm Width)is the way it is packaged. You can find it in the Tape & Reel (TR)package. Currently, the output is configured to use Tri-State, Non-Inverted. The trigger configured with it uses Positive Edge. This electronic part is mounted in the way of Surface Mount. The supply voltage is set to 2V~6V. In this case, the operating temperature is -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. In FPGA terms, D flip flop is a type of 74ACseries FPGA. This D flip flop should not have a frequency greater than 153MHz. In total, there are 1 elements. T flip flop consumes 4μA quiescent energy. There have been 20 terminations. You can search similar parts based on 74AC574. Power is supplied from a voltage of 3.3V volts. There is 4.5pF input capacitance for this T flip flop. ACis the family of this D flip flop. In this case, the electronic component is mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. The clock edge trigger type for this device is Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. An electronic part with 8bits has been designed. There is a 6Vmaximum supply voltage (Vsup). It is imperative that the supply voltage (Vsup) is maintained above 2Vin order to ensure normal operation. The superior flexibility of this product is achieved by using 8 circuits. As a result of its reliability, this D flip flop is ideally suited for TAPE AND REEL. The D flip flop has no ports embedded. Its output current of 24mAallows for maximum design flexibility. This input has 3lines in it.
SN74AC574NSR Features
Tape & Reel (TR) package
74AC series
20 pins
8 Bits
SN74AC574NSR Applications
There are a lot of Texas Instruments SN74AC574NSR Flip Flops applications.
- Latch
- Modulo – n – counter
- QML qualified product
- Registers
- EMI reduction circuitry
- Clock pulse
- Memory
- 2 – Bit synchronous counter
- Latch-up performance
- ESD performance
