SN74AC74DBR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 14 |
| Weight | 121.789551mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74AC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AC74 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 3.3/5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 24mA |
| Clock Frequency | 160MHz |
| Propagation Delay | 14 ns |
| Turn On Delay Time | 6 ns |
| Family | AC |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 2μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 10ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Input Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 95000000Hz |
| Height | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AC74DBR Overview
It is embeded in 14-SSOP (0.209, 5.30mm Width) case. It is included in the package Cut Tape (CT). T flip flop is configured with an output of Differential. JK flip flop uses Positive Edgeas the trigger. Surface Mountis occupied by this electronic component. With a supply voltage of 2V~6V volts, it operates. The operating temperature is -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. JK flip flop belongs to the 74ACseries of FPGAs. In order for it to function properly, its output frequency should not exceed 160MHz. Despite external influences, it consumes 2μAof quiescent current. The number of terminations is 14. The object belongs to the 74AC74 family. A voltage of 3V provides power to the D latch. This JK flip flop has a 3pFfarad input capacitance. It belongs to the family of electronic devices known as AC. Surface Mount mounts this electronic component. The electronic flip flop is designed with pins 14. This device has the clock edge trigger type of Positive Edge. This device is part of the FF/Latchesbase part number family. As soon as 6Vis reached, Vsup reaches its maximum value. Normally, the supply voltage (Vsup) should be kept above 2V. Its superior flexibility is attributed to its use of 2 circuits. As a result of its reliable performance, this T flip flop is suitable for TR. The D latch runs on a voltage of 3.3/5V volts. Its output current of 24mAallows for maximum design flexibility. It has 4lines.
SN74AC74DBR Features
Cut Tape (CT) package
74AC series
14 pins
3.3/5V power supplies
SN74AC74DBR Applications
There are a lot of Texas Instruments SN74AC74DBR Flip Flops applications.
- Event Detectors
- Registers
- Divide a clock signal by 2 or 4
- Power down protection
- Parallel data storage
- Digital electronics systems
- Differential Individual
- Communications
- Latch-up performance
- Shift registers
