SN74ACT563DBRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 156.687814mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ACT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74ACT563 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 11.5 ns |
| Turn On Delay Time | 6.5 ns |
| Family | ACT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ACT563DBRG4 Overview
In the 20-SSOP (0.209, 5.30mm Width) package, it is embedded. Tape & Reel (TR) is the packaging method. The output it is configured with uses Tri-State. There is a logic type of D-Type Transparent Latch associated with this electrical device. Based on the way of Surface Mount, this electronic part is mounted. A voltage of 4.5V~5.5V is used as the supply voltage for this device. During operation, the temperature is set at -40°C~85°C. In the 74ACT series, this FPGA is located. The design of this electronic part is based on 8 bits. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It belongs to 74ACT563 family. In order to function, the supply voltage should be set to 5V. The 20 pind are equipped with it. In terms of electronic devices, this one is in the ACT family. The 20 pins are designed into it. Electronic parts are mounted using the Surface Mount method. This device has a total of 2 ports. Subcategory FF/Latches includes this part. 5.5V is the maximum voltage (Vsup) that can be supplied. There are 5V power supplies required for this machine to operate. (Vsup) should be greater than 4.5V. Input Lines consist of electronic circuits, and there are 8. Based on its reliable performance, this device is suitable for TAPE AND REEL. As the output current is 24mA, the design flexibility is maximum.
SN74ACT563DBRG4 Features
20-SSOP (0.209, 5.30mm Width) package
74ACT series
8 Bits
74ACT563 family
20 pin count
20 pins
5V power supplies
SN74ACT563DBRG4 Applications
There are a lot of Texas Instruments SN74ACT563DBRG4 Latches applications.
- Pattern generators
- Multistage ripple counting
- Automotive ADAS
- Decade counting 7-segment decimal display
- Flip-flops
- Relay
- High-speed logic
- Avionics
- Digital bus buffer
- Synchronous frequency dividers
