SN74AHC16374DGGR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Weight | 223.195796mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceiver |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74AHC16374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 8mA |
| Number of Bits | 16 |
| Clock Frequency | 120MHz |
| Propagation Delay | 16.2 ns |
| Turn On Delay Time | 1 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 8mA 8mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 10.1ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 11.5 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 2.5pF |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Max Frequency@Nom-Sup | 75000000Hz |
| Height | 1.2mm |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1.15mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHC16374DGGR Overview
48-TFSOP (0.240, 6.10mm Width)is the way it is packaged. The package Cut Tape (CT)contains it. T flip flop uses Tri-State, Non-Invertedas the output. This trigger is configured to use Positive Edge. Surface Mountis in the way of this electric part. The JK flip flop operates at a voltage of 2V~5.5V. -40°C~85°C TAis the operating temperature. This D latch has the type D-Type. It belongs to the 74AHCseries of FPGAs. In order for it to function properly, its output frequency should not exceed 120MHz. In total, it contains 2 elements. There is 4μA quiescent consumption. A total of 48 terminations have been made. The 74AHC16374 family contains this object. A voltage of 3.3V is used as the power supply for this D latch. Its input capacitance is 2.5pF farads. An electronic device belonging to the family AHC/VHC/H/U/Vcan be found here. This electronic part is mounted in the way of Surface Mount. This board is designed with 48pins on it. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. The part is included in Bus Driver/Transceiver. The design is based on 16bits. The maximal supply voltage (Vsup) reaches 5.5V. For normal operation, the supply voltage (Vsup) should be above 2V. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TR. The flip flop has 2ports embedded within it. Its output current of 8mAallows for maximum design flexibility. In order for the chip to function, it has 3output lines.
SN74AHC16374DGGR Features
Cut Tape (CT) package
74AHC series
48 pins
16 Bits
SN74AHC16374DGGR Applications
There are a lot of Texas Instruments SN74AHC16374DGGR Flip Flops applications.
- Computing
- ESD protection
- Safety Clamp
- Dynamic threshold performance
- ATE
- Latch-up performance
- Memory
- Single Up Count-Control Line
- Instrumentation
- Asynchronous counter
