SN74AHC374DWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Base Part Number | 74AHC374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 8mA |
| Number of Bits | 8 |
| Clock Frequency | 120MHz |
| Propagation Delay | 18.5 ns |
| Turn On Delay Time | 1 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 10.1ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHC374DWR Overview
The flip flop is packaged in a case of 20-SOIC (0.295, 7.50mm Width). D flip flop is embedded in the Tape & Reel (TR) package. There is a Tri-State, Non-Invertedoutput configured with it. This trigger uses the value Positive Edge. This electronic part is mounted in the way of Surface Mount. A voltage of 2V~5.5Vis required for its operation. In the operating environment, the temperature is -40°C~85°C TA. This logic flip flop is classified as type D-Type. In this case, it is a type of FPGA belonging to the 74AHC series. In order for it to function properly, its output frequency should not exceed 120MHz. The list contains 1 elements. During its operation, it consumes 4μA quiescent energy. Terminations are 20. This D latch belongs to the family of 74AHC374. The power source is powered by 3.3V. A JK flip flop with a 4pFfarad input capacitance is used here. In terms of electronic devices, this device belongs to the AHC/VHC/H/U/Vfamily of devices. It is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 20. In this device, the clock edge trigger type is Positive Edge. This part is included in FF/Latches. There are 8bits in its design. It reaches 5.5Vwhen the supply voltage is maximal (Vsup). For normal operation, the supply voltage (Vsup) should be above 2V. Despite its superior flexibility, it relies on 8 circuits to achieve it. Considering its reliability, this T flip flop is well suited for TR. It operates from 2/5.5V power supplies. A D flip flop with 2embedded ports is available. It offers maximum design flexibility with its output current of 8mA. It has 3lines.
SN74AHC374DWR Features
Tape & Reel (TR) package
74AHC series
20 pins
8 Bits
2/5.5V power supplies
SN74AHC374DWR Applications
There are a lot of Texas Instruments SN74AHC374DWR Flip Flops applications.
- Dynamic threshold performance
- Consumer
- Data storage
- Guaranteed simultaneous switching noise level
- Patented noise
- Frequency division
- Matched Rise and Fall
- Clock pulse
- Pattern generators
- Frequency Divider circuits
