SN74AHC574DBR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 156.687814mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74AHC574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 8mA |
| Number of Bits | 8 |
| Clock Frequency | 115MHz |
| Propagation Delay | 19 ns |
| Turn On Delay Time | 1 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 10.6ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Height | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHC574DBR Overview
It is embeded in 20-SSOP (0.209, 5.30mm Width) case. The package Cut Tape (CT)contains it. Tri-State, Non-Invertedis the output configured for it. It is configured with a trigger that uses Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. It operates with a supply voltage of 2V~5.5V. A temperature of -40°C~85°C TAis considered to be the operating temperature. Logic flip flops of this type are classified as D-Type. The FPGA belongs to the 74AHC series. There should be no greater frequency than 115MHzon its output. There are 1 elements in it. Despite external influences, it consumes 4μAof quiescent current. A total of 20 terminations have been made. It is a member of the 74AHC574 family. The D flip flop is powered by a voltage of 3.3V . There is 3pF input capacitance for this T flip flop. An electronic device belonging to the family AHC/VHC/H/U/Vcan be found here. There is an electronic component mounted in the way of Surface Mount. As you can see from the design, it has pins with 20. This device's clock edge trigger type is Positive Edge. The RS flip flops belongs to FF/Latches base part number. 8bits are used in its design. Vsup reaches its maximum value at 5.5V. For normal operation, the supply voltage (Vsup) should be kept above 2V. The superior flexibility of this circuit is achieved by using 8 circuits. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TR. The power supply is 2/5.5V. The D flip flop is embedded with 2ports. As a result of its output current of 8mA, it is very flexible in terms of design. A total of 3input lines have been provided.
SN74AHC574DBR Features
Cut Tape (CT) package
74AHC series
20 pins
8 Bits
2/5.5V power supplies
SN74AHC574DBR Applications
There are a lot of Texas Instruments SN74AHC574DBR Flip Flops applications.
- Dynamic threshold performance
- Storage Registers
- Storage registers
- Data Synchronizers
- High Performance Logic for test systems
- Clock pulse
- Guaranteed simultaneous switching noise level
- Automotive
- Set-reset capability
- Buffer registers
