SN74AHC74MDREP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 122.413241mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AHC74 |
| Function | Set(Preset) and Reset |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 8mA |
| Clock Frequency | 115MHz |
| Propagation Delay | 15.4 ns |
| Turn On Delay Time | 1 ns |
| Family | AHC |
| Logic Function | AND, D-Type |
| Current - Quiescent (Iq) | 2μA |
| Current - Output High, Low | 8mA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 9.3ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 2pF |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHC74MDREP Overview
The item is packaged in 14-SOIC (0.154, 3.90mm Width)cases. D flip flop is embedded in the Tape & Reel (TR) package. As configured, the output uses Differential. The trigger configured with it uses Positive Edge. Surface Mountmounts this electrical part. A supply voltage of 2V~5.5V is required for operation. In this case, the operating temperature is -55°C~125°C TA. D-Typedescribes this flip flop. In FPGA terms, D flip flop is a type of 74AHCseries FPGA. There should be no greater frequency than 115MHzon its output. T flip flop consumes 2μA quiescent energy. There are 14 terminations,If you search by 74AHC74, you will find similar parts. It is powered from a supply voltage of 3.3V. Its input capacitance is 2pFfarads. Devices in the AHCfamily are electronic devices. There is an electronic part mounted in the way of Surface Mount. The 14pins are designed into the board. In this device, the clock edge trigger type is Positive Edge. The RS flip flops belongs to FF/Latches base part number. There is a 5.5Vmaximum supply voltage (Vsup). If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 2V. Due to its superior flexibility, it uses 2 circuits. This D flip flop is well suited for TR based on its reliable performance. The 8mA output current allows it to be designed with the greatest amount of flexibility. There are no output lines on the JK flip flop.
SN74AHC74MDREP Features
Tape & Reel (TR) package
74AHC series
14 pins
SN74AHC74MDREP Applications
There are a lot of Texas Instruments SN74AHC74MDREP Flip Flops applications.
- Bounce elimination switch
- Single Down Count-Control Line
- Frequency Dividers
- Buffered Clock
- Latch-up performance
- ESCC
- QML qualified product
- Matched Rise and Fall
- CMOS Process
- Memory
