SN74AHC74N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Weight | 927.99329mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Supply Voltage | 3.3V |
| Base Part Number | 74AHC74 |
| Function | Set(Preset) and Reset |
| Output Voltage | 5.5V |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 2 |
| Load Capacitance | 50pF |
| Output Current | 8mA |
| Clock Frequency | 115MHz |
| Propagation Delay | 18 ns |
| Turn On Delay Time | 1 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 2μA |
| Current - Output High, Low | 8mA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 9.3ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 2pF |
| Number of Input Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHC74N Overview
As a result, it is packaged as 14-DIP (0.300, 7.62mm). You can find it in the Tubepackage. This output is configured with Differential. JK flip flop uses Positive Edgeas the trigger. Through Holeis positioned in the way of this electronic part. The JK flip flop operates with an input voltage of 2V~5.5V volts. Temperature is set to -40°C~125°C TA. Logic flip flops of this type are classified as D-Type. The FPGA belongs to the 74AHC series. Its output frequency should not exceed 115MHz Hz. T flip flop consumes 2μA quiescent energy. There are 14 terminations,D latch belongs to the 74AHC74 family. It is powered from a supply voltage of 3.3V. Its input capacitance is 2pF farads. The electronic device belongs to the AHC/VHC/H/U/Vfamily. Electronic part Through Holeis mounted in the way. The 14pins are designed into the board. This device's clock edge trigger type is Positive Edge. This device is part of the FF/Latchesbase part number family. For normal operation, the supply voltage (Vsup) should be kept above 2V. With an output current of 8mA, it is possible to design the device in any way you want. It is reported that there are 4 input lines. It is of 2 channels.
SN74AHC74N Features
Tube package
74AHC series
14 pins
SN74AHC74N Applications
There are a lot of Texas Instruments SN74AHC74N Flip Flops applications.
- Shift Registers
- Frequency division
- Consumer
- Asynchronous counter
- Count Modes
- Functionally equivalent to the MC10/100EL29
- Patented noise
- Power down protection
- Clock pulse
- Cold spare funcion
