SN74AHCT273DWG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74AHCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74AHCT273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Clock Frequency | 75MHz |
| Propagation Delay | 9.2 ns |
| Turn On Delay Time | 1 ns |
| Family | AHCT/VHCT/VT |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 9.2ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 2.5pF |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 8 |
| fmax-Min | 65 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 45000000Hz |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHCT273DWG4 Overview
As a result, it is packaged as 20-SOIC (0.295, 7.50mm Width). There is an embedded version in the package Tube. T flip flop is configured with an output of Non-Inverted. It is configured with the trigger Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. With a supply voltage of 4.5V~5.5V volts, it operates. A temperature of -40°C~85°C TAis considered to be the operating temperature. It belongs to the type D-Typeof flip flops. In FPGA terms, D flip flop is a type of 74AHCTseries FPGA. Its output frequency should not exceed 75MHz. A total of 1elements are present in it. During its operation, it consumes 4μA quiescent energy. Terminations are 20. The 74AHCT273 family contains this object. The power source is powered by 5V. There is 2.5pF input capacitance for this T flip flop. An electronic device belonging to the family AHCT/VHCT/VTcan be found here. It is mounted in the way of Surface Mount. A total of 20pins are provided on this board. This device has Positive Edgeas its clock edge trigger type. There is a base part number FF/Latchesfor the RS flip flops. The design is based on 8bits. There are 5V power supplies attached to it. Optimal efficiency requires a supply voltage of 5V. 8input lines are available for you to choose from.
SN74AHCT273DWG4 Features
Tube package
74AHCT series
20 pins
8 Bits
5V power supplies
SN74AHCT273DWG4 Applications
There are a lot of Texas Instruments SN74AHCT273DWG4 Flip Flops applications.
- Shift registers
- High Performance Logic for test systems
- Matched Rise and Fall
- Parallel data storage
- Event Detectors
- Automotive
- Patented noise
- Pattern generators
- ESD performance
- Dynamic threshold performance
