SN74AHCT374DWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74AHCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74AHCT374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 130MHz |
| Propagation Delay | 10.4 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 1 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 10.4ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHCT374DWR Overview
The flip flop is packaged in a case of 20-SOIC (0.295, 7.50mm Width). You can find it in the Cut Tape (CT)package. Currently, the output is configured to use Tri-State, Non-Inverted. There is a trigger configured with Positive Edge. Surface Mountis positioned in the way of this electronic part. A voltage of 4.5V~5.5Vis required for its operation. Temperature is set to -40°C~85°C TA. This electronic flip flop is of type D-Type. In terms of FPGAs, it belongs to the 74AHCT series. Its output frequency should not exceed 130MHz. The element count is 1 . There are 20 terminations,Members of the 74AHCT374family make up this object. A voltage of 5V is used as the power supply for this D latch. This T flip flop has a capacitance of 4pF farads at the input. The electronic device belongs to the AHCT/VHCT/VTfamily. It is mounted in the way of Surface Mount. A total of 20pins are provided on this board. This device has the clock edge trigger type of Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. There are 8bits in this flip flop. Due to its superior flexibility, it uses 8 circuits. As a result of its reliability, this D flip flop is ideally suited for TR. A power supply of 5Vis required to operate it. This flip flop has a total of 2ports. For high efficiency, the supply voltage should be kept at 5V. The number of input lines is 3. It consumes a total of 4μA quiescent current at any given time.
SN74AHCT374DWR Features
Cut Tape (CT) package
74AHCT series
20 pins
8 Bits
5V power supplies
SN74AHCT374DWR Applications
There are a lot of Texas Instruments SN74AHCT374DWR Flip Flops applications.
- Data storage
- Clock pulse
- Modulo – n – counter
- Patented noise
- ESCC
- Individual Asynchronous Resets
- Synchronous counter
- Test & Measurement
- Count Modes
- Dynamic threshold performance
