SN74AHCT574DGVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 60.186038mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74AHCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AHCT574 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 115MHz |
| Propagation Delay | 10.6 ns |
| Turn On Delay Time | 1 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 10.6ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1.05mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHCT574DGVR Overview
20-TFSOP (0.173, 4.40mm Width)is the packaging method. A package named Cut Tape (CT)includes it. The output it is configured with uses Tri-State, Non-Inverted. JK flip flop uses Positive Edgeas the trigger. In this case, the electronic component is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. It is at -40°C~125°C TAdegrees Celsius that the system is operating. This D latch has the type D-Type. In FPGA terms, D flip flop is a type of 74AHCTseries FPGA. There should be no greater frequency than 115MHzon its output. In total, it contains 1 elements. It consumes 4μA of quiescent current without being affected by external factors. A total of 20 terminations have been made. The object belongs to the 74AHCT574 family. An input voltage of 5Vpowers the D latch. The input capacitance of this JK flip flopis 3pF farads. In terms of electronic devices, this device belongs to the AHCT/VHCT/VTfamily of devices. It is mounted by the way of Surface Mount. It is designed with 20 pins. This device has the clock edge trigger type of Positive Edge. The part you are looking for is included in FF/Latches. There are 8bits in this flip flop. Its superior flexibility is attributed to its use of 8 circuits. Due to its reliability, this T flip flop is well suited for TR. There are 5V power supplies attached to it. This flip flop has a total of 2ports. In order to ensure high efficiency, the supply voltage should remain at 5V. This input has 3lines.
SN74AHCT574DGVR Features
Cut Tape (CT) package
74AHCT series
20 pins
8 Bits
5V power supplies
SN74AHCT574DGVR Applications
There are a lot of Texas Instruments SN74AHCT574DGVR Flip Flops applications.
- Matched Rise and Fall
- Cold spare funcion
- Bus hold
- Circuit Design
- ESD performance
- Data storage
- Set-reset capability
- CMOS Process
- ESCC
- Data transfer
