SN74AHCT74N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Weight | 927.99329mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Series | 74AHCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Base Part Number | 74AHCT74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 8mA |
| Clock Frequency | 140MHz |
| Propagation Delay | 8.8 ns |
| Turn On Delay Time | 1 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 2μA |
| Current - Output High, Low | 8mA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 8.8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 2pF |
| Number of Input Lines | 4 |
| fmax-Min | 80 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 65000000Hz |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHCT74N Overview
In the form of 14-DIP (0.300, 7.62mm), it has been packaged. The Tubepackage contains it. It is configured with Differentialas an output. JK flip flop uses Positive Edgeas the trigger. There is an electric part mounted in the way of Through Hole. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. It is at -40°C~125°C TAdegrees Celsius that the system is operating. D-Typeis the type of this D latch. In FPGA terms, D flip flop is a type of 74AHCTseries FPGA. A frequency of 140MHzshould not be exceeded by its output. As a result, it consumes 2μA of quiescent current without being affected by external factors. There have been 14 terminations. If you search by 74AHCT74, you will find similar parts. A voltage of 5V is used to power it. The input capacitance of this JK flip flopis 2pF farads. The electronic device belongs to the AHCT/VHCT/VTfamily. There is an electronic component mounted in the way of Through Hole. The 14pins are designed into the board. This device exhibits a clock edge trigger type of Positive Edge. This part is included in FF/Latches. The superior flexibility of this circuit is achieved by using 2 circuits. There are 5V power supplies attached to it. Optimal efficiency requires a supply voltage of 5V. It offers maximum design flexibility with its output current of 8mA. This input has 4lines.
SN74AHCT74N Features
Tube package
74AHCT series
14 pins
5V power supplies
SN74AHCT74N Applications
There are a lot of Texas Instruments SN74AHCT74N Flip Flops applications.
- Common Clocks
- Bounce elimination switch
- High Performance Logic for test systems
- Single Up Count-Control Line
- ESCC
- Data transfer
- Shift Registers
- Count Modes
- ESD performance
- Individual Asynchronous Resets
