SN74AHCT74NSR
| Parameters | |
|---|---|
| Number of Pins | 14 |
| Weight | 208.312296mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AHCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74AHCT74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 140MHz |
| Propagation Delay | 8.8 ns |
| Turn On Delay Time | 1 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 2μA |
| Current - Output High, Low | 8mA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 8.8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 2pF |
| Number of Input Lines | 4 |
| fmax-Min | 80 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 65000000Hz |
| Height | 2mm |
| Length | 10.3mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.209, 5.30mm Width) |
SN74AHCT74NSR Overview
As a result, it is packaged as 14-SOIC (0.209, 5.30mm Width). A package named Tape & Reel (TR)includes it. There is a Differentialoutput configured with it. It is configured with a trigger that uses Positive Edge. There is an electric part mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. In this case, the operating temperature is -40°C~125°C TA. There is D-Type type of electronic flip flop associated with this device. FPGAs belonging to the 74AHCTseries contain this type of chip. This D flip flop should not have a frequency greater than 140MHz. Despite external influences, it consumes 2μAof quiescent current. There have been 14 terminations. The 74AHCT74 family contains this object. The power source is powered by 5V. Its input capacitance is 2pFfarads. Devices in the AHCT/VHCT/VTfamily are electronic devices. This electronic part is mounted in the way of Surface Mount. A total of 14pins are provided on this board. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. The part you are looking for is included in FF/Latches. Using 2 circuits, it is highly flexible. In view of its reliability, this D flip flop is a good fit for TR. There are 5V power supplies attached to it. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. Currently, there are 4 input lines present.
SN74AHCT74NSR Features
Tape & Reel (TR) package
74AHCT series
14 pins
5V power supplies
SN74AHCT74NSR Applications
There are a lot of Texas Instruments SN74AHCT74NSR Flip Flops applications.
- Communications
- EMI reduction circuitry
- QML qualified product
- Clock pulse
- ESD protection
- Balanced Propagation Delays
- Synchronous counter
- Balanced 24 mA output drivers
- Pattern generators
- Supports Live Insertion
