SN74AHCT74QDRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 122.413241mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, 74AHCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AHCT74 |
| Function | Set(Preset) and Reset |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 140MHz |
| Propagation Delay | 8.8 ns |
| Turn On Delay Time | 1 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 2μA |
| Current - Output High, Low | 8mA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 8.8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 2pF |
| fmax-Min | 80 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 65000000Hz |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHCT74QDRQ1 Overview
As a result, it is packaged as 14-SOIC (0.154, 3.90mm Width). Package Tape & Reel (TR)embeds it. The output it is configured with uses Differential. It is configured with the trigger Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. The JK flip flop operates at 4.5V~5.5Vvolts. -40°C~125°C TAis the operating temperature. A flip flop of this type is classified as a D-Type. The FPGA belongs to the Automotive, AEC-Q100, 74AHCT series. You should not exceed 140MHzin the output frequency of the device. During its operation, it consumes 2μA quiescent energy. The number of terminations is 14. D latch belongs to the 74AHCT74 family. A voltage of 5V is used as the power supply for this D latch. This JK flip flop has a 2pFfarad input capacitance. Electronic devices of this type belong to the AHCT/VHCT/VTfamily. A part of the electronic system is mounted in the way of Surface Mount. This board has 14 pins. This device exhibits a clock edge trigger type of Positive Edge. The part is included in FF/Latches. To achieve this superior flexibility, 2 circuits are used. Considering its reliability, this T flip flop is well suited for TR. The D latch operates on 5V volts. It is recommended that the supply voltage be kept at 5Vto maximize efficiency.
SN74AHCT74QDRQ1 Features
Tape & Reel (TR) package
Automotive, AEC-Q100, 74AHCT series
14 pins
5V power supplies
SN74AHCT74QDRQ1 Applications
There are a lot of Texas Instruments SN74AHCT74QDRQ1 Flip Flops applications.
- High Performance Logic for test systems
- Common Clocks
- Dynamic threshold performance
- Patented noise
- Safety Clamp
- Guaranteed simultaneous switching noise level
- Divide a clock signal by 2 or 4
- EMI reduction circuitry
- Balanced Propagation Delays
- Clock pulse
