SN74ALS174DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74ALS174 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 7 |
| Load Capacitance | 50pF |
| Output Current | 8mA |
| Clock Frequency | 50MHz |
| Propagation Delay | 17 ns |
| Turn On Delay Time | 3 ns |
| Family | ALS |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 19mA |
| Current - Output High, Low | 400μA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 6 |
| Max Propagation Delay @ V, Max CL | 17ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Number of Input Lines | 3 |
| Number of Output Lines | 2 |
| fmax-Min | 50 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 50000000Hz |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ALS174DR Overview
16-SOIC (0.154, 3.90mm Width)is the packaging method. A package named Tape & Reel (TR)includes it. It is configured with Non-Invertedas an output. This trigger uses the value Positive Edge. Surface Mountis in the way of this electric part. With a supply voltage of 4.5V~5.5V volts, it operates. The operating temperature is 0°C~70°C TA. It is an electronic flip flop with the type D-Type. FPGAs belonging to the 74ALSseries contain this type of chip. You should not exceed 50MHzin the output frequency of the device. There are 1 elements in it. Despite external influences, it consumes 19mAof quiescent current. In 16terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. Members of the 74ALS174family make up this object. The D flip flop is powered by a voltage of 5V . ALSis the family of this D flip flop. There is an electronic part that is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 16. This device exhibits a clock edge trigger type of Positive Edge. The RS flip flops belongs to FF/Latches base part number. 7 circuits are used to achieve its superior flexibility. As a result of its reliability, this D flip flop is ideally suited for TR. The D latch runs on a voltage of 5V volts. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. The 8mA output current allows it to be designed with the greatest amount of flexibility. The JK flip flop is with 2 output lines to operate. There are 3 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply.
SN74ALS174DR Features
Tape & Reel (TR) package
74ALS series
16 pins
5V power supplies
SN74ALS174DR Applications
There are a lot of Texas Instruments SN74ALS174DR Flip Flops applications.
- Storage Registers
- Computing
- Frequency division
- Differential Individual
- ESD protection
- Data Synchronizers
- Modulo – n – counter
- Computers
- Supports Live Insertion
- Reduced system switching noise
