SN74ALS175N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Base Part Number | 74ALS175 |
| Function | Master Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 7 |
| Operating Supply Current | 100μA |
| Load Capacitance | 50pF |
| Nominal Supply Current | 100μA |
| Output Current | 8mA |
| Clock Frequency | 50MHz |
| Propagation Delay | 17 ns |
| Turn On Delay Time | 3 ns |
| Family | ALS |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 14mA |
| Current - Output High, Low | 400μA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 4 |
| Max Propagation Delay @ V, Max CL | 17ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Number of Input Lines | 3 |
| Number of Output Lines | 2 |
| fmax-Min | 50 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 50000000Hz |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ALS175N Overview
The flip flop is packaged in 16-DIP (0.300, 7.62mm). It is included in the package Tube. This output is configured with Differential. There is a trigger configured with Positive Edge. Through Holeis in the way of this electric part. A 4.5V~5.5Vsupply voltage is required for it to operate. The operating temperature is 0°C~70°C TA. It belongs to the type D-Typeof flip flops. In terms of FPGAs, it belongs to the 74ALS series. You should not exceed 50MHzin its output frequency. In total, it contains 1 elements. There is a consumption of 14mAof quiescent energy. There are 16 terminations,The object belongs to the 74ALS175 family. Power is supplied from a voltage of 5V volts. In terms of electronic devices, this device belongs to the ALSfamily of devices. This electronic part is mounted in the way of Through Hole. A total of 16pins are provided on this board. It has a clock edge trigger type of Positive Edge. It is included in FF/Latches. 7 circuits are used to achieve its superior flexibility. There are 5V power supplies attached to it. High efficiency requires the supply voltage to be maintained at 5V. The 8mA output current allows it to be designed with the greatest amount of flexibility. There are 2 output lines in this JK flip flop. Currently, there are 3 input lines present.
SN74ALS175N Features
Tube package
74ALS series
16 pins
5V power supplies
SN74ALS175N Applications
There are a lot of Texas Instruments SN74ALS175N Flip Flops applications.
- ATE
- Power down protection
- Data storage
- Event Detectors
- Registers
- Convert a momentary switch to a toggle switch
- Supports Live Insertion
- Storage Registers
- Balanced 24 mA output drivers
- Modulo – n – counter
