SN74ALS175NSR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Weight | 200.686274mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ALS175 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 7 |
| Load Capacitance | 50pF |
| Output Current | 8mA |
| Clock Frequency | 50MHz |
| Propagation Delay | 17 ns |
| Turn On Delay Time | 3 ns |
| Family | ALS |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 14mA |
| Current - Output High, Low | 400μA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 4 |
| Max Propagation Delay @ V, Max CL | 17ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Number of Input Lines | 3 |
| Number of Output Lines | 2 |
| fmax-Min | 50 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 50000000Hz |
| Height | 2mm |
| Length | 10.3mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ALS175NSR Overview
In the form of 16-SOIC (0.209, 5.30mm Width), it has been packaged. The Tape & Reel (TR)package contains it. There is a Differentialoutput configured with it. It is configured with a trigger that uses Positive Edge. Surface Mountmounts this electrical part. The supply voltage is set to 4.5V~5.5V. The operating temperature is 0°C~70°C TA. There is D-Type type of electronic flip flop associated with this device. The FPGA belongs to the 74ALS series. There should be no greater frequency than 50MHzon its output. In total, there are 1 elements. As a result, it consumes 14mA quiescent current. 16terminations have occurred. The object belongs to the 74ALS175 family. A voltage of 5V is used as the power supply for this D latch. A device of this type belongs to the family of ALS. In this case, the electronic component is mounted in the way of Surface Mount. Basically, it is designed with a set of 16 pins. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. Its flexibility is enhanced by 7 circuits. A reliable performance of this D flip flop makes it well suited for use in TR. An electrical current of 5V volts is applied to it. For high efficiency, the supply voltage should be kept at 5V. As a result of its output current of 8mA, it is very flexible in terms of design. The JK flip flop is with 2 output lines to operate. Currently, there are 3 lines of input.
SN74ALS175NSR Features
Tape & Reel (TR) package
74ALS series
16 pins
5V power supplies
SN74ALS175NSR Applications
There are a lot of Texas Instruments SN74ALS175NSR Flip Flops applications.
- Balanced Propagation Delays
- Control circuits
- Data storage
- ESD protection
- Bus hold
- Single Up Count-Control Line
- Load Control
- Cold spare funcion
- High Performance Logic for test systems
- Convert a momentary switch to a toggle switch
