SN74ALS273DWRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latch |
| Packing Method | TR |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74ALS273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 35MHz |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 2 ns |
| Family | ALS |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 20mA |
| Current - Output High, Low | 2.6mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 15ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 29mA |
| Number of Input Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.35mm |
| Length | 12.8mm |
| Width | 7.52mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ALS273DWRG4 Overview
20-SOIC (0.295, 7.50mm Width)is the way it is packaged. You can find it in the Tape & Reel (TR)package. T flip flop uses Non-Invertedas the output. JK flip flop uses Positive Edgeas the trigger. Surface Mountmounts this electrical part. It operates with a supply voltage of 4.5V~5.5V. It is operating at 0°C~70°C TA. This logic flip flop is classified as type D-Type. In terms of FPGAs, it belongs to the 74ALS series. A frequency of 35MHzshould be the maximum output frequency. D latch consists of 1 elements. As a result, it consumes 20mA of quiescent current without being affected by external factors. Currently, there are 20 terminations. JK flip flop belongs to 74ALS273 family. It is powered from a supply voltage of 5V. The electronic device belongs to the ALSfamily. There is an electronic part mounted in the way of Surface Mount. As you can see from the design, it has pins with 20. This device's clock edge trigger type is Positive Edge. This device has the base part number FF/Latch. This flip flop is designed with 8 Bits. Using 8 circuits, it is highly flexible. This D flip flop is well suited for TR based on its reliable performance. It runs on 5Vvolts of power. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. With an output current of 24mA, this device offers maximum design flexibility. This input has 3lines in it.
SN74ALS273DWRG4 Features
Tape & Reel (TR) package
74ALS series
20 pins
8 Bits
5V power supplies
SN74ALS273DWRG4 Applications
There are a lot of Texas Instruments SN74ALS273DWRG4 Flip Flops applications.
- Data Synchronizers
- Pattern generators
- Counters
- Safety Clamp
- Data storage
- Supports Live Insertion
- Test & Measurement
- Convert a momentary switch to a toggle switch
- Clock pulse
- Synchronous counter
