SN74ALS29821NT
| Parameters | |
|---|---|
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 48mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 10 |
| Max Propagation Delay @ V, Max CL | 16ns @ 5V, 300pF |
| Trigger Type | Positive Edge |
| Height Seated (Max) | 5.08mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Mounting Type | Through Hole |
| Package / Case | 24-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Additional Feature | POWER OFF DISABLE OUTPUTS TO PERMIT LIVE INSERTION |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PDIP-T24 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.25V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Number of Ports | 2 |
| Family | ALS |
| Current - Quiescent (Iq) | 115mA |
SN74ALS29821NT Overview
24-DIP (0.300, 7.62mm)is the way it is packaged. A package named Tubeincludes it. T flip flop uses Tri-State, Non-Invertedas the output. Positive Edgeis the trigger it is configured with. There is an electronic component mounted in the way of Through Hole. The JK flip flop operates at a voltage of 4.75V~5.25V. It is operating at 0°C~70°C TA. D-Typedescribes this flip flop. In FPGA terms, D flip flop is a type of 74ALSseries FPGA. D latch consists of 1 elements. T flip flop consumes 115mA quiescent energy. The number of terminations is 24. The power supply voltage is 5V. It belongs to the family of electronic devices known as ALS. Vsup reaches its maximum value at 5.25V. Normal operation requires a supply voltage (Vsup) above 4.75V. This D flip flop is equipped with 0 ports. Additionally, you may refer to the additional POWER OFF DISABLE OUTPUTS TO PERMIT LIVE INSERTION of the electronic flip flop.
SN74ALS29821NT Features
Tube package
74ALS series
SN74ALS29821NT Applications
There are a lot of Rochester Electronics, LLC SN74ALS29821NT Flip Flops applications.
- Data storage
- Consumer
- Balanced 24 mA output drivers
- Balanced Propagation Delays
- Safety Clamp
- Digital electronics systems
- EMI reduction circuitry
- Frequency Divider circuits
- Individual Asynchronous Resets
- Memory
