SN74ALS533ADWRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ALS |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ALS533 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Ports | 2 |
| Nominal Supply Current | 26mA |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 19 ns |
| Turn On Delay Time | 6 ns |
| Family | ALS |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 2.6mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74ALS533ADWRG4 Overview
It is embedded in the 20-SOIC (0.295, 7.50mm Width) package. Tape & Reel (TR) is the way it is packaged. In its configuration, Tri-State is used as the output. There is D-Type Transparent Latch logic type for this electrical device. Based on the way of Surface Mount, this electronic part is mounted. In order for it to operate, it needs a supply voltage of 4.5V~5.5V. The operating temperature is 0°C~70°C. The 74ALS series is associated with this FPGA. Electronic parts with 8 bits are designed for this application. A device such as this has 20 terminations designed. As a member of the 74ALS533 family, it falls under that category. With a supply voltage of 5V, it operates. The device is equipped with 20 pins. This electronic device belongs to the family of ALS. There are 20 pins on it. The electronic part is mounted in a way that corresponds to Surface Mount. In this device, there are 2 ports. In the subcategory FF/Latches, this part belongs. It is possible to reach 5.5V when the maximum supply voltage (Vsup) has been reached. There are 5V power supplies required for this machine to operate. It is recommended that the supply voltage (Vsup) be greater than 4.5V. There are 8 input lines in which electronic circuits are present. Based on its reliable performance, this device is appropriate for TAPE AND REEL. As the output current is 24mA, the design flexibility is maximum.
SN74ALS533ADWRG4 Features
20-SOIC (0.295, 7.50mm Width) package
74ALS series
8 Bits
74ALS533 family
20 pin count
20 pins
5V power supplies
SN74ALS533ADWRG4 Applications
There are a lot of Texas Instruments SN74ALS533ADWRG4 Latches applications.
- Frequency
- Motor Drives
- Parallel data synchronization
- Hammer
- Data acquisition
- Pattern Generators
- Relay replacement
- Parallel data storage
- Bus system register with enable parallel lines at bus side
- Clocks
