SN74ALS563BDWRE4
| Parameters | |
|---|---|
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 2.6mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ALS |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Additional Feature | BROADSIDE VERSION OF 533 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ALS563 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 26mA |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 18 ns |
| Turn On Delay Time | 6 ns |
| Family | ALS |
| Logic Function | D-Type, Latch |
SN74ALS563BDWRE4 Overview
It is embedded in the 20-SOIC (0.295, 7.50mm Width) package. Tape & Reel (TR) is the way it is packaged. It uses Tri-State as its output configuration. This electrical device has the logic type D-Type Transparent Latch. Surface Mount is used to mount this electronic part. It operates at a voltage of 4.5V~5.5V. The operating temperature is 0°C~70°C. There are a number of FPGAs in this series, including this one. This electronic part is designed with 8 Bits. This device is designed with 20 terminations. The family 74ALS563 includes it. The device works with a voltage of 5V for its supply voltage. The device is equipped with 20 pins. There is a device in this electronic family called ALS. Designed with 20 pins, it is compatible with a wide range of devices. Surface Mount is the way in which this electronic part is mounted. This device has 2 ports on board, which are all available at the same time. This part can be found within the FF/Latches subcategory. It is possible to reach 5.5V when the maximum supply voltage (Vsup) has been reached. 5V power supplies are needed to operate it. (Vsup) should be greater than 4.5V. It contains 8 input lines where electronic circuits are present. Its reliable performance makes it an excellent choice for TAPE AND REEL. With an output current of 24mA, it is highly flexible in terms of design. In addition, BROADSIDE VERSION OF 533 characterize it.
SN74ALS563BDWRE4 Features
20-SOIC (0.295, 7.50mm Width) package
74ALS series
8 Bits
74ALS563 family
20 pin count
20 pins
5V power supplies
SN74ALS563BDWRE4 Applications
There are a lot of Texas Instruments SN74ALS563BDWRE4 Latches applications.
- Frequency dividing
- Instrumentation
- Synchronous frequency dividers
- Shift left register
- Pseudo-random code generators
- Data acquisition
- Parallel Input
- Watches
- Display driver
- Relay
