SN74ALS574BDW
| Parameters | |
|---|---|
| Number of Input Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74ALS574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Channels | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 35MHz |
| Propagation Delay | 14 ns |
| Turn On Delay Time | 3 ns |
| Family | ALS |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 18mA |
| Current - Output High, Low | 2.6mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 14ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
SN74ALS574BDW Overview
The package is in the form of 20-SOIC (0.295, 7.50mm Width). The Tubepackage contains it. As configured, the output uses Tri-State, Non-Inverted. It is configured with a trigger that uses a value of Positive Edge. The electronic part is mounted in the way of Surface Mount. A 4.5V~5.5Vsupply voltage is required for it to operate. It is at 0°C~70°C TAdegrees Celsius that the system is operating. It belongs to the type D-Typeof flip flops. In FPGA terms, D flip flop is a type of 74ALSseries FPGA. It should not exceed 35MHzin terms of its output frequency. A total of 1elements are contained within it. There is a consumption of 18mAof quiescent energy. There have been 20 terminations. JK flip flop belongs to 74ALS574 family. The power supply voltage is 5V. In terms of electronic devices, this device belongs to the ALSfamily of devices. This electronic part is mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. In this device, the clock edge trigger type is Positive Edge. The part you are looking for is included in FF/Latches. An electronic part with 8bits has been designed. In order for the device to operate, it requires 5V power supplies. The flip flop has 2ports embedded within it. Optimal efficiency requires a supply voltage of 5V. With an output current of 24mA, it is possible to design the device in any way you want. It has 3lines. Currently, there are 8 channels available.
SN74ALS574BDW Features
Tube package
74ALS series
20 pins
8 Bits
5V power supplies
SN74ALS574BDW Applications
There are a lot of Texas Instruments SN74ALS574BDW Flip Flops applications.
- Buffer registers
- Dynamic threshold performance
- Instrumentation
- Clock pulse
- Frequency division
- Shift registers
- Individual Asynchronous Resets
- Frequency Divider circuits
- Data Synchronizers
- Consumer
