SN74ALS574BDWG4
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Supplier Device Package | 20-SOIC |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74ALS |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | 4.5V~5.5V |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Clock Frequency | 35MHz |
| Current - Quiescent (Iq) | 18mA |
| Current - Output High, Low | 2.6mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 14ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| RoHS Status | ROHS3 Compliant |
SN74ALS574BDWG4 Overview
It is packaged in the way of 20-SOIC (0.295, 7.50mm Width). It is included in the package Tube. T flip flop uses Tri-State, Non-Invertedas its output configuration. JK flip flop uses Positive Edgeas the trigger. This electronic part is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 4.5V~5.5V. It is operating at a temperature of 0°C~70°C TA. This D latch has the type D-Type. FPGAs belonging to the 74ALSseries contain this type of chip. In order for it to function properly, its output frequency should not exceed 35MHz. A total of 1elements are contained within it. This process consumes 18mA quiescents.
SN74ALS574BDWG4 Features
Tube package
74ALS series
SN74ALS574BDWG4 Applications
There are a lot of Rochester Electronics, LLC SN74ALS574BDWG4 Flip Flops applications.
- Divide a clock signal by 2 or 4
- Shift registers
- Convert a momentary switch to a toggle switch
- Data transfer
- Bus hold
- Single Up Count-Control Line
- Data Synchronizers
- Count Modes
- ESD performance
- Storage registers
