SN74ALS574BN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Weight | 1.1991g |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | 74ALS574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Channels | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 35MHz |
| Propagation Delay | 14 ns |
| Turn On Delay Time | 3 ns |
| Family | ALS |
| Logic Function | D-Type, Flip-Flop, NOT |
| Current - Quiescent (Iq) | 18mA |
| Current - Output High, Low | 2.6mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 14ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Number of Input Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Height | 5.08mm |
| Length | 24.33mm |
| Width | 6.35mm |
| Thickness | 4.57mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ALS574BN Overview
The item is packaged in 20-DIP (0.300, 7.62mm)cases. As part of the package Tube, it is embedded. As configured, the output uses Tri-State, Non-Inverted. The trigger configured with it uses Positive Edge. In this case, the electronic component is mounted in the way of Through Hole. It operates with a supply voltage of 4.5V~5.5V. A temperature of 0°C~70°C TAis used in the operation. D-Typedescribes this flip flop. In terms of FPGAs, it belongs to the 74ALS series. You should not exceed 35MHzin its output frequency. In total, it contains 1 elements. This process consumes 18mA quiescents. 20terminations have occurred. The 74ALS574 family contains this object. It is powered by a voltage of 5V . The electronic device belongs to the ALSfamily. There is an electronic component mounted in the way of Through Hole. This board has 20 pins. This device exhibits a clock edge trigger type of Positive Edge. The RS flip flops belongs to FF/Latches base part number. Flip flops designed with 8bits are used in this part. In order for the device to operate, it requires 5V power supplies. The flip flop has 2embedded ports. The supply voltage should be maintained at 5V for high efficiency. The output current of 24mA makes it feature maximum design flexibility. There are 3 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. It is of 8 channels.
SN74ALS574BN Features
Tube package
74ALS series
20 pins
8 Bits
5V power supplies
SN74ALS574BN Applications
There are a lot of Texas Instruments SN74ALS574BN Flip Flops applications.
- Consumer
- Storage Registers
- Frequency Divider circuits
- Load Control
- Control circuits
- Digital electronics systems
- Bus hold
- ESCC
- Divide a clock signal by 2 or 4
- Event Detectors
