SN74ALS575ANT
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 24-DIP (0.300, 7.62mm) |
| Number of Pins | 24 |
| Weight | 1.753503g |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Base Part Number | 74ALS575 |
| Function | Master Reset |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 30MHz |
| Propagation Delay | 14 ns |
| Turn On Delay Time | 4 ns |
| Family | ALS |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 17mA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 2.6mA 24mA |
| Max Propagation Delay @ V, Max CL | 14ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Number of Input Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ALS575ANT Overview
24-DIP (0.300, 7.62mm)is the way it is packaged. D flip flop is included in the Tubepackage. The output it is configured with uses Tri-State, Non-Inverted. Positive Edgeis the trigger it is configured with. In this case, the electronic component is mounted in the way of Through Hole. With a supply voltage of 4.5V~5.5V volts, it operates. In the operating environment, the temperature is 0°C~70°C TA. D-Typeis the type of this D latch. JK flip flop is a part of the 74ALSseries of FPGAs. This D flip flop should not have a frequency greater than 30MHz. A total of 1 elements are present. T flip flop consumes 17mA quiescent energy. It has been determined that there have been 24 terminations. The object belongs to the 74ALS575 family. Power is provided by a 5V supply. It belongs to the family of electronic devices known as ALS. Electronic part Through Holeis mounted in the way. It is designed with 24 pins. A Positive Edgeclock edge trigger is used in this device. The part is included in FF/Latches. This flip flop is designed with 8 Bits. Due to its superior flexibility, it uses 8 circuits. It operates from 5V power supplies. A total of 2ports are embedded in the D flip flop. For high efficiency, the supply voltage should be kept at 5V. Featuring the maximum design flexibility, it has an output current of 24mA . Currently, there are 4 lines of input.
SN74ALS575ANT Features
Tube package
74ALS series
24 pins
8 Bits
5V power supplies
SN74ALS575ANT Applications
There are a lot of Texas Instruments SN74ALS575ANT Flip Flops applications.
- Test & Measurement
- Pattern generators
- Functionally equivalent to the MC10/100EL29
- Patented noise
- Consumer
- Supports Live Insertion
- Instrumentation
- Counters
- Guaranteed simultaneous switching noise level
- QML qualified product
