SN74ALS576BDWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ALS576 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 30MHz |
| Propagation Delay | 14 ns |
| Turn On Delay Time | 3 ns |
| Family | ALS |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 18mA |
| Current - Output High, Low | 2.6mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 14ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Number of Input Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ALS576BDWR Overview
The package is in the form of 20-SOIC (0.295, 7.50mm Width). The Tape & Reel (TR)package contains it. Tri-State, Invertedis the output configured for it. JK flip flop uses Positive Edgeas the trigger. In this case, the electronic component is mounted in the way of Surface Mount. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. In the operating environment, the temperature is 0°C~70°C TA. This D latch has the type D-Type. This type of FPGA is a part of the 74ALS series. There should be no greater frequency than 30MHzon its output. The list contains 1 elements. There is 18mA quiescent consumption. A total of 20terminations have been recorded. The object belongs to the 74ALS576 family. An input voltage of 5Vpowers the D latch. ALSis the family of this D flip flop. There is an electronic part that is mounted in the way of Surface Mount. It is designed with 20 pins. This device has the clock edge trigger type of Positive Edge. It is part of the FF/Latchesbase part number family. It is designed with 8bits. The superior flexibility of this circuit is achieved by using 8 circuits. As a result of its reliable performance, this T flip flop is suitable for TR. It operates from 5V power supplies. A total of 2ports are embedded in the D flip flop. High efficiency requires the supply voltage to be maintained at 5V. With an output current of 24mA, this device offers maximum design flexibility. 3input lines are available for you to choose from.
SN74ALS576BDWR Features
Tape & Reel (TR) package
74ALS series
20 pins
8 Bits
5V power supplies
SN74ALS576BDWR Applications
There are a lot of Texas Instruments SN74ALS576BDWR Flip Flops applications.
- Consumer
- Asynchronous counter
- QML qualified product
- Single Down Count-Control Line
- Memory
- Common Clocks
- Digital electronics systems
- Storage registers
- Parallel data storage
- Event Detectors
