SN74ALS576BN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Weight | 1.1991g |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceiver |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | 74ALS576 |
| Function | Standard |
| Output Type | Tri-State, Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 30MHz |
| Propagation Delay | 14 ns |
| Turn On Delay Time | 3 ns |
| Family | ALS |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 18mA |
| Current - Output High, Low | 2.6mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 14ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Number of Input Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Height | 5.08mm |
| Length | 24.33mm |
| Width | 6.35mm |
| Thickness | 4.57mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ALS576BN Overview
20-DIP (0.300, 7.62mm)is the packaging method. The Tubepackage contains it. The output it is configured with uses Tri-State, Inverted. JK flip flop uses Positive Edgeas the trigger. Through Holeis positioned in the way of this electronic part. The supply voltage is set to 4.5V~5.5V. Temperature is set to 0°C~70°C TA. This logic flip flop is classified as type D-Type. The 74ALSseries comprises this type of FPGA. This D flip flop should not have a frequency greater than 30MHz. D latch consists of 1 elements. There is a consumption of 18mAof quiescent energy. Currently, there are 20 terminations. JK flip flop belongs to 74ALS576 family. An input voltage of 5Vpowers the D latch. This D flip flop belongs to the family of ALS. There is an electronic part mounted in the way of Through Hole. It is designed with 20 pins. It has a clock edge trigger type of Positive Edge. This RS flip flops is a part number Bus Driver/Transceiver. There are 8bits in its design. 8 circuits are used to achieve its superior flexibility. The system runs on a power supply of 5V watts. The D flip flop is embedded with 2ports. Optimal efficiency requires a supply voltage of 5V. This T flip flop features a maximum design flexibility due to its output current of 24mA. It is reported that there are 3 input lines.
SN74ALS576BN Features
Tube package
74ALS series
20 pins
8 Bits
5V power supplies
SN74ALS576BN Applications
There are a lot of Texas Instruments SN74ALS576BN Flip Flops applications.
- Common Clocks
- Modulo – n – counter
- Clock pulse
- Communications
- Individual Asynchronous Resets
- Memory
- Functionally equivalent to the MC10/100EL29
- 2 – Bit synchronous counter
- Reduced system switching noise
- ESD protection
