SN74ALS74ANSR
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 14 |
| Weight | 208.312296mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ALS74 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 8mA |
| Clock Frequency | 34MHz |
| Propagation Delay | 18 ns |
| Turn On Delay Time | 5 ns |
| Family | ALS |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4mA |
| Current - Output High, Low | 400μA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 18ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Number of Input Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2mm |
| Length | 10.3mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
SN74ALS74ANSR Overview
14-SOIC (0.209, 5.30mm Width)is the way it is packaged. A package named Tape & Reel (TR)includes it. T flip flop uses Differentialas its output configuration. It is configured with a trigger that uses a value of Positive Edge. There is an electric part mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 4.5V~5.5V. A temperature of 0°C~70°C TAis considered to be the operating temperature. It belongs to the type D-Typeof flip flops. The 74ALSseries comprises this type of FPGA. A frequency of 34MHzshould not be exceeded by its output. T flip flop consumes 4mA quiescent energy. Terminations are 14. The 74ALS74family includes it. It is powered by a voltage of 5V . This D flip flop belongs to the family of ALS. Surface Mount mounts this electronic component. A total of 14pins are provided on this board. This device has the clock edge trigger type of Positive Edge. This device is part of the FF/Latchesbase part number family. To achieve this superior flexibility, 2 circuits are used. As a result of its reliability, this D flip flop is ideally suited for TR. There are 5V power supplies attached to it. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. With an output current of 8mA, it is possible to design the device in any way you want. 4input lines are available for you to choose from.
SN74ALS74ANSR Features
Tape & Reel (TR) package
74ALS series
14 pins
5V power supplies
SN74ALS74ANSR Applications
There are a lot of Texas Instruments SN74ALS74ANSR Flip Flops applications.
- Shift registers
- Shift Registers
- ATE
- Guaranteed simultaneous switching noise level
- ESD protection
- Supports Live Insertion
- Frequency Dividers
- Data Synchronizers
- Counters
- Differential Individual
