SN74ALS841DWRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ALS |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Additional Feature | POWER OFF DISABLE OUTPUTS TO PERMIT LIVE INSERTION |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ALS841 |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 10:10 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 62mA |
| Output Current | 24mA |
| Number of Bits | 10 |
| Propagation Delay | 13 ns |
| Turn On Delay Time | 7 ns |
| Family | ALS |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 2.6mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Independent Circuits | 1 |
| Number of Output Lines | 10 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
SN74ALS841DWRE4 Overview
There is an embedded version of it in package 24-SOIC (0.295, 7.50mm Width). Tape & Reel (TR) is the way in which it is packaged. In its configuration, Tri-State is used as the output. There is a logic type of D-Type Transparent Latch for this electrical device. This electronic part is mounted in the way of Surface Mount. It operates at a voltage of 4.5V~5.5V. A temperature of 0°C~70°C is used for operation. An FPGA of this type belongs to the 74ALS series. The electronic part in this image has 10 bits. This device has 24 terminations. It belongs to 74ALS841 family. With the supply voltage set at 5V, it is able to operate. It is equipped with 24 pin count. In terms of electronic devices, this one is in the ALS family. This board has 24 pins on it, which is what it is designed for. This electronic part is mounted in the way of Surface Mount. This device has 2 ports. The part is in the FF/Latches subcategory. 5.5V is the maximum supply voltage (Vsup). If the supply voltage (Vsup) is greater than 4.5V, then the device is working correctly. The reliability of this device makes it well suited to TAPE AND REEL. With 24mA, maximum design flexibility is ensured. 10 output lines generate the binary equivalent of the input lines. In addition to that, it is also characterized by POWER OFF DISABLE OUTPUTS TO PERMIT LIVE INSERTION.
SN74ALS841DWRE4 Features
24-SOIC (0.295, 7.50mm Width) package
74ALS series
10 Bits
74ALS841 family
24 pin count
24 pins
SN74ALS841DWRE4 Applications
There are a lot of Texas Instruments SN74ALS841DWRE4 Latches applications.
- Automotive ADAS
- Decade counting 7-segment decimal display
- Phase comparator
- Decade counting
- Avionics
- Display
- Stacked or Push-Down Registers
- Parallel-to-Serial Data Conversion
- Counter
- Pattern generators
