SN74ALS874BNT
| Parameters | |
|---|---|
| Weight | 1.753503g |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | WITH CLEAR |
| Subcategory | Bus Driver/Transceiver |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Base Part Number | 74ALS874 |
| Function | Master Reset |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 30MHz |
| Propagation Delay | 14 ns |
| Turn On Delay Time | 4 ns |
| Family | ALS |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 21mA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 2.6mA 24mA |
| Number of Bits per Element | 4 |
| Max Propagation Delay @ V, Max CL | 14ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 30mA |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 30000000Hz |
| Height | 4.57mm |
| Length | 31.64mm |
| Width | 6.73mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 24-DIP (0.300, 7.62mm) |
| Number of Pins | 24 |
SN74ALS874BNT Overview
It is packaged in the way of 24-DIP (0.300, 7.62mm). You can find it in the Tubepackage. This output is configured with Tri-State, Non-Inverted. The trigger configured with it uses Positive Edge. It is mounted in the way of Through Hole. With a supply voltage of 4.5V~5.5V volts, it operates. It is operating at 0°C~70°C TA. D-Typedescribes this flip flop. FPGAs belonging to the 74ALSseries contain this type of chip. A frequency of 30MHzshould be the maximum output frequency. In total, it contains 2 elements. There is 21mA quiescent consumption. There are 24 terminations,You can search similar parts based on 74ALS874. The D flip flop is powered by a voltage of 5V . In this case, the D flip flop belongs to the ALSfamily. There is an electronic part mounted in the way of Through Hole. There are 24pins on it. This device's clock edge trigger type is Positive Edge. This device has the base part number Bus Driver/Transceiver. The flip flop is designed with 8bits. An electrical current of 5V volts is applied to it. The flip flop has 2ports embedded within it. The supply voltage should be maintained at 5V for high efficiency. The output current of 24mA makes it feature maximum design flexibility. There are 1 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. Additionally, it is characterized by WITH CLEAR.
SN74ALS874BNT Features
Tube package
74ALS series
24 pins
8 Bits
5V power supplies
SN74ALS874BNT Applications
There are a lot of Texas Instruments SN74ALS874BNT Flip Flops applications.
- Count Modes
- Frequency Dividers
- Event Detectors
- Balanced Propagation Delays
- Counters
- Balanced 24 mA output drivers
- Functionally equivalent to the MC10/100EL29
- 2 – Bit synchronous counter
- Common Clocks
- Frequency division
