SN74ALS876ADW
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Termination | SMD/SMT |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | WITH PRESET |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ALS876 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 30MHz |
| Propagation Delay | 14 ns |
| Turn On Delay Time | 4 ns |
| Family | ALS |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 21mA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 2.6mA 24mA |
| Number of Bits per Element | 4 |
| Max Propagation Delay @ V, Max CL | 14ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 30000000Hz |
| Width | 7.5mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ALS876ADW Overview
The package is in the form of 24-SOIC (0.295, 7.50mm Width). Package Tubeembeds it. In the configuration, Tri-State, Invertedis used as the output. It is configured with a trigger that uses Positive Edge. Surface Mountis occupied by this electronic component. With a supply voltage of 4.5V~5.5V volts, it operates. 0°C~70°C TAis the operating temperature. D-Typedescribes this flip flop. FPGAs belonging to the 74ALSseries contain this type of chip. A frequency of 30MHzshould be the maximum output frequency. In total, it contains 2 elements. There is 21mA quiescent consumption. Currently, there are 24 terminations. It is a member of the 74ALS876 family. It is powered from a supply voltage of 5V. It belongs to the family of electronic devices known as ALS. A part of the electronic system is mounted in the way of Surface Mount. As you can see from the design, it has pins with 24. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. This part is included in FF/Latches. An electronic part designed with 8bits is used in this application. There are 5V power supplies attached to it. The flip flop has 2ports embedded within it. In order to ensure high efficiency, the supply voltage should remain at 5V. As a result of its output current of 24mA, it is very flexible in terms of design. The JK flip flop is with 1 output lines to operate. It is also characterized by WITH PRESET.
SN74ALS876ADW Features
Tube package
74ALS series
24 pins
8 Bits
5V power supplies
SN74ALS876ADW Applications
There are a lot of Texas Instruments SN74ALS876ADW Flip Flops applications.
- Latch-up performance
- Registers
- Shift registers
- Matched Rise and Fall
- Computers
- Cold spare funcion
- Latch
- Balanced 24 mA output drivers
- CMOS Process
- Counters
