SN74ALS876ANT
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | WITH PRESET |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Base Part Number | 74ALS876 |
| Function | Master Reset |
| Output Type | Tri-State, Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 30MHz |
| Propagation Delay | 14 ns |
| Turn On Delay Time | 4 ns |
| Family | ALS |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 21mA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 2.6mA 24mA |
| Number of Bits per Element | 4 |
| Max Propagation Delay @ V, Max CL | 14ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 30000000Hz |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 24-DIP (0.300, 7.62mm) |
| Number of Pins | 24 |
| Weight | 1.753503g |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
SN74ALS876ANT Overview
In the form of 24-DIP (0.300, 7.62mm), it has been packaged. D flip flop is included in the Tubepackage. Currently, the output is configured to use Tri-State, Inverted. This trigger uses the value Positive Edge. Through Holemounts this electrical part. A supply voltage of 4.5V~5.5V is required for operation. It is operating at a temperature of 0°C~70°C TA. D-Typedescribes this flip flop. JK flip flop is a part of the 74ALSseries of FPGAs. Its output frequency should not exceed 30MHz Hz. A total of 2elements are contained within it. Despite external influences, it consumes 21mAof quiescent current. A total of 24terminations have been recorded. The 74ALS876 family contains it. A voltage of 5V is used to power it. In this case, the D flip flop belongs to the ALSfamily. In this case, the electronic component is mounted in the way of Through Hole. As you can see from the design, it has pins with 24. This device exhibits a clock edge trigger type of Positive Edge. It is included in FF/Latches. The flip flop is designed with 8bits. The D latch operates on 5V volts. There are 2 ports embedded in the flip flops. For high efficiency, the supply voltage should be kept at 5V. As a result of its output current of 24mA, it is very flexible in terms of design. It has 1 output lines to operate. WITH PRESETis also one of its characteristics.
SN74ALS876ANT Features
Tube package
74ALS series
24 pins
8 Bits
5V power supplies
SN74ALS876ANT Applications
There are a lot of Texas Instruments SN74ALS876ANT Flip Flops applications.
- Reduced system switching noise
- Frequency Divider circuits
- Patented noise
- Memory
- ESD performance
- Shift registers
- Storage Registers
- Computing
- Communications
- Safety Clamp
