SN74ALVCH162721DLR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Weight | 694.790113mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ALVCH |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ALVCH162721 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 20 |
| Clock Frequency | 150MHz |
| Propagation Delay | 6.2 ns |
| Turn On Delay Time | 1 ns |
| Family | ALVC/VCX/A |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 12mA 12mA |
| Max Propagation Delay @ V, Max CL | 5.3ns @ 3.3V, 30pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 20 |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Height | 2.79mm |
| Length | 18.41mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ALVCH162721DLR Overview
56-BSSOP (0.295, 7.50mm Width)is the packaging method. It is contained within the Tape & Reel (TR)package. As configured, the output uses Tri-State, Non-Inverted. This trigger uses the value Positive Edge. Surface Mountis occupied by this electronic component. The JK flip flop operates at a voltage of 1.65V~3.6V. A temperature of -40°C~85°C TAis used in the operation. This electronic flip flop is of type D-Type. In this case, it is a type of FPGA belonging to the 74ALVCH series. It should not exceed 150MHzin its output frequency. A total of 1 elements are present. Despite external influences, it consumes 40μAof quiescent current. A total of 56terminations have been recorded. This D latch belongs to the family of 74ALVCH162721. Power is supplied from a voltage of 1.8V volts. The input capacitance of this JK flip flopis 3.5pF farads. It is a member of the ALVC/VCX/Afamily of D flip flop. The electronic part is mounted in the way of Surface Mount. Basically, it is designed with a set of 56 pins. A Positive Edgeclock edge trigger is used in this device. The part you are looking for is included in FF/Latches. There are 20bits in its design. Considering its reliability, this T flip flop is well suited for TR. The flip flop has 2embedded ports. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. A total of 20input lines have been provided.
SN74ALVCH162721DLR Features
Tape & Reel (TR) package
74ALVCH series
56 pins
20 Bits
SN74ALVCH162721DLR Applications
There are a lot of Texas Instruments SN74ALVCH162721DLR Flip Flops applications.
- Functionally equivalent to the MC10/100EL29
- Storage registers
- 2 – Bit synchronous counter
- Circuit Design
- Data transfer
- Synchronous counter
- Frequency Dividers
- Buffered Clock
- Differential Individual
- ATE
