SN74ALVCH162721GR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 56 |
| Weight | 252.792698mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74ALVCH |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceiver |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74ALVCH162721 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 12mA |
| Number of Bits | 20 |
| Clock Frequency | 150MHz |
| Propagation Delay | 6.2 ns |
| Turn On Delay Time | 1 ns |
| Family | ALVC/VCX/A |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 12mA 12mA |
| Max Propagation Delay @ V, Max CL | 5.3ns @ 3.3V, 30pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 20 |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Height | 1.2mm |
| Length | 14mm |
| Width | 6.1mm |
| Thickness | 1.15mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ALVCH162721GR Overview
The flip flop is packaged in 56-TFSOP (0.240, 6.10mm Width). D flip flop is included in the Cut Tape (CT)package. T flip flop uses Tri-State, Non-Invertedas its output configuration. It is configured with a trigger that uses a value of Positive Edge. Surface Mountis in the way of this electric part. The supply voltage is set to 1.65V~3.6V. A temperature of -40°C~85°C TAis used in the operation. There is D-Type type of electronic flip flop associated with this device. It is a type of FPGA belonging to the 74ALVCH series. You should not exceed 150MHzin the output frequency of the device. The element count is 1 . This process consumes 40μA quiescents. A total of 56terminations have been recorded. It is a member of the 74ALVCH162721 family. Power is supplied from a voltage of 1.8V volts. Input capacitance of this device is 3.5pF farads. It is a member of the ALVC/VCX/Afamily of D flip flop. A part of the electronic system is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 56. The clock edge trigger type for this device is Positive Edge. The RS flip flops belongs to Bus Driver/Transceiver base part number. The design is based on 20bits. This D flip flop is well suited for TR based on its reliable performance. This D flip flop is equipped with 0 ports. The output current of 12mA makes it feature maximum design flexibility. In order for the chip to function, it has 3output lines. This input has 20lines.
SN74ALVCH162721GR Features
Cut Tape (CT) package
74ALVCH series
56 pins
20 Bits
SN74ALVCH162721GR Applications
There are a lot of Texas Instruments SN74ALVCH162721GR Flip Flops applications.
- Bus hold
- Count Modes
- Buffer registers
- QML qualified product
- Shift Registers
- ESCC
- Computing
- 2 – Bit synchronous counter
- Supports Live Insertion
- ESD performance
