Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
56-BSSOP (0.295, 7.50mm Width) |
Number of Pins |
56 |
Weight |
689.999043mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Cut Tape (CT) |
Series |
74ALVCH |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
56 |
Additional Feature |
WITH INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION; WITH CLOCK ENABLE |
Packing Method |
TAPE AND REEL |
Technology |
CMOS |
Voltage - Supply |
1.65V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Number of Functions |
1 |
Supply Voltage |
1.8V |
Terminal Pitch |
0.635mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
74ALVCH16600 |
Pin Count |
56 |
Qualification Status |
Not Qualified |
Number of Elements |
1 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
3.6V |
Power Supplies |
3.3V |
Number of Channels |
18 |
Number of Circuits |
18-Bit |
Load Capacitance |
50pF |
Number of Ports |
2 |
Number of Bits |
18 |
Propagation Delay |
6.8 ns |
Turn On Delay Time |
7.3 ns |
Family |
ALVC/VCX/A |
Logic Function |
Transceiver |
Output Characteristics |
3-STATE |
Current - Output High, Low |
24mA 24mA |
Logic Type |
Universal Bus Transceiver |
Max I(ol) |
0.024 A |
Prop. Delay@Nom-Sup |
4 ns |
Trigger Type |
NEGATIVE EDGE |
Control Type |
INDEPENDENT CONTROL |
Count Direction |
BIDIRECTIONAL |
Translation |
N/A |
Height Seated (Max) |
2.79mm |
Width |
7.49mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74ALVCH16600DLR Overview
A copy of it is embedded in the package 56-BSSOP (0.295, 7.50mm Width). In this case, it is packaged in the same way as Cut Tape (CT). Flexible 18-Bit circuits are used to achieve its superior performance. As far as the logic type of this electrical device is concerned, it is Universal Bus Transceiver. This electronic part is mounted in the way of Surface Mount. As far as the operating temperature is concerned, it should be higher than -40°C~85°C. In addition, 24mA 24mA features the highest level of flexibility in its design due to its high and low output currents. FPGAs in the 74ALVCH series are this type. Powered by 1.65V~3.6V, it operates on a voltage of V. It belongs to 74ALVCH16600 family. In 56 terminations, a transmission line is terminated with an impedance-matched device. In order to maintain normal operation of the device, the supply voltage should remain above 1.8V. There is a 56 pin count that is included in this device. In order to design this electronic part, 18 Bits have been used. An example of this is through the use of 2 terminations, where a particular device is used to end a transmission line with an impedance matching device, fitted with its characteristic impedance. It is mounted in the direction of Surface Mount. 56 pins are used in the design. The device belongs to the ALVC/VCX/A family of electronic devices. Upon reaching 3.6V, the maximum supply voltage (Vsup) is reached. It operates from 3.3V power supplies. The element consists of 1 elements in total. In the configuration, it uses the trigger NEGATIVE EDGE to trigger the event. The reliable performance of this device makes it a good choice for TAPE AND REEL. The second characteristic that it has is WITH INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION; WITH CLOCK ENABLE. There is a strong growth in the number of channels: 18.
SN74ALVCH16600DLR Features
56-BSSOP (0.295, 7.50mm Width) package
74ALVCH series
74ALVCH16600 family
56 pin count
56 pins
3.3V power supplies
1 elements
SN74ALVCH16600DLR Applications
There are a lot of Texas Instruments SN74ALVCH16600DLR Universal Bus Functions applications.
- Mountain power station
- Freezer warning buzzer circuits
- Urban rail vehicle
- Automatic watering system
- Circuits involving computation and processing
- Overcurrent/Short circuit protection
- Massager
- Flip flops
- Wearable Health and Fitness Devices
- Square wave oscillators