SN74AS109AD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74AS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | JK Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AS109 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Output Current | 20mA |
| Clock Frequency | 105MHz |
| Propagation Delay | 9 ns |
| Turn On Delay Time | 2.5 ns |
| Family | AS |
| Logic Function | AND, Flip-Flop, JK-Type |
| Current - Quiescent (Iq) | 17mA |
| Current - Output High, Low | 2mA 20mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 9ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Schmitt Trigger | No |
| Number of Input Lines | 5 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AS109AD Overview
The package is in the form of 16-SOIC (0.154, 3.90mm Width). As part of the package Tube, it is embedded. Differentialis the output configured for it. This trigger uses the value Positive Edge. Surface Mountmounts this electrical part. The supply voltage is set to 4.5V~5.5V. The operating temperature is 0°C~70°C TA. It belongs to the type JK Typeof flip flops. FPGAs belonging to the 74ASseries contain this type of chip. There should be no greater frequency than 105MHzon its output. There is 17mA quiescent consumption. Terminations are 16. JK flip flop belongs to 74AS109 family. The power supply voltage is 5V. In terms of electronic devices, this device belongs to the ASfamily of devices. The electronic part is mounted in the way of Surface Mount. With its 16pins, it is designed to work with most electronic flip flops. This device has Positive Edgeas its clock edge trigger type. It is part of the FF/Latchesbase part number family. The superior flexibility of this product is achieved by using 2 circuits. The supply voltage should be maintained at 5V for high efficiency. Its output current of 20mAallows for maximum design flexibility. Currently, there are 5 input lines present.
SN74AS109AD Features
Tube package
74AS series
16 pins
SN74AS109AD Applications
There are a lot of Texas Instruments SN74AS109AD Flip Flops applications.
- Pattern generators
- Registers
- Memory
- Frequency Dividers
- EMI reduction circuitry
- Control circuits
- Event Detectors
- Count Modes
- 2 – Bit synchronous counter
- Communications
