SN74AS174D
| Parameters | |
|---|---|
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74AS174 |
| Function | Master Reset |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 7 |
| Load Capacitance | 50pF |
| Output Current | 20mA |
| Clock Frequency | 100MHz |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 3.6 ns |
| Family | AS |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 45mA |
| Current - Output High, Low | 2mA 20mA |
| Number of Bits per Element | 6 |
| Max Propagation Delay @ V, Max CL | 10ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 45mA |
| Number of Input Lines | 3 |
| Number of Output Lines | 2 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74AS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
SN74AS174D Overview
16-SOIC (0.154, 3.90mm Width)is the way it is packaged. D flip flop is included in the Tubepackage. Currently, the output is configured to use Tri-State, Non-Inverted. It is configured with a trigger that uses Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. A 4.5V~5.5Vsupply voltage is required for it to operate. In this case, the operating temperature is 0°C~70°C TA. D-Typeis the type of this D latch. In terms of FPGAs, it belongs to the 74AS series. Its output frequency should not exceed 100MHz. A total of 1 elements are present. It consumes 45mA of quiescent In 16terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. It is a member of the 74AS174 family. A voltage of 5V provides power to the D latch. This D flip flop belongs to the family of AS. There is an electronic part mounted in the way of Surface Mount. A total of 16pins are provided on this board. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. 7 circuits are used to achieve its superior flexibility. In order to ensure high efficiency, the supply voltage should remain at 5V. It offers maximum design flexibility with its output current of 20mA. It has 2 output lines to operate. A total of 3input lines have been provided.
SN74AS174D Features
Tube package
74AS series
16 pins
SN74AS174D Applications
There are a lot of Texas Instruments SN74AS174D Flip Flops applications.
- Latch
- Synchronous counter
- Communications
- Buffer registers
- Dynamic threshold performance
- Data transfer
- Single Down Count-Control Line
- Clock pulse
- Patented noise
- Digital electronics systems
