SN74AS576DWR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AS |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AS576 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Inverted |
| Number of Elements | 1 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 48mA |
| Clock Frequency | 125MHz |
| Propagation Delay | 9 ns |
| Turn On Delay Time | 3 ns |
| Family | AS |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 125mA |
| Current - Output High, Low | 15mA 48mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 9ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Number of Input Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
SN74AS576DWR Overview
The package is in the form of 20-SOIC (0.295, 7.50mm Width). There is an embedded version in the package Tape & Reel (TR). In the configuration, Tri-State, Invertedis used as the output. It is configured with the trigger Positive Edge. It is mounted in the way of Surface Mount. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. The operating temperature is 0°C~70°C TA. This electronic flip flop is of type D-Type. The 74ASseries comprises this type of FPGA. There should be no greater frequency than 125MHzon its output. D latch consists of 1 elements. This process consumes 125mA quiescents. A total of 20 terminations have been made. The 74AS576 family contains this object. A voltage of 5V is used to power it. This D flip flop belongs to the family of AS. This electronic part is mounted in the way of Surface Mount. Basically, it is designed with a set of 20 pins. In this device, the clock edge trigger type is Positive Edge. This device has the base part number FF/Latches. As soon as Vsup reaches 5.5V, the maximum supply voltage is reached. The supply voltage (Vsup) should be maintained above 4.5V for normal operation. In view of its reliability, this D flip flop is a good fit for TAPE AND REEL. The D latch operates on 5V volts. A total of 2ports are embedded in the D flip flop. The output current of 48mA makes it feature maximum design flexibility. It is reported that there are 3 input lines.
SN74AS576DWR Features
Tape & Reel (TR) package
74AS series
20 pins
5V power supplies
SN74AS576DWR Applications
There are a lot of Texas Instruments SN74AS576DWR Flip Flops applications.
- Data storage
- Bus hold
- Pattern generators
- Single Up Count-Control Line
- Power down protection
- Reduced system switching noise
- Frequency division
- CMOS Process
- Control circuits
- Count Modes
