SN74AS74AD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74AS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74AS74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 20mA |
| Clock Frequency | 105MHz |
| Propagation Delay | 9 ns |
| Turn On Delay Time | 3 ns |
| Family | AS |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 16mA |
| Current - Output High, Low | 2mA 20mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 9ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Number of Input Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AS74AD Overview
It is packaged in the way of 14-SOIC (0.154, 3.90mm Width). It is contained within the Tubepackage. T flip flop uses Differentialas the output. There is a trigger configured with Positive Edge. There is an electronic component mounted in the way of Surface Mount. A 4.5V~5.5Vsupply voltage is required for it to operate. In this case, the operating temperature is 0°C~70°C TA. The type of this D latch is D-Type. It belongs to the 74ASseries of FPGAs. There should be no greater frequency than 105MHzon its output. This process consumes 16mA quiescents. It has been determined that there have been 14 terminations. The 74AS74 family contains it. Power is supplied from a voltage of 5V volts. In terms of electronic devices, this device belongs to the ASfamily of devices. A part of the electronic system is mounted in the way of Surface Mount. This board is designed with 14pins on it. This device has Positive Edgeas its clock edge trigger type. The part you are looking for is included in FF/Latches. Using 2 circuits, it is highly flexible. The power supply is 5V. For high efficiency, the supply voltage should be kept at 5V. Its output current of 20mAallows for maximum design flexibility. A total of 4input lines have been provided.
SN74AS74AD Features
Tube package
74AS series
14 pins
5V power supplies
SN74AS74AD Applications
There are a lot of Texas Instruments SN74AS74AD Flip Flops applications.
- Automotive
- Memory
- Shift Registers
- Data Synchronizers
- Count Modes
- Communications
- Reduced system switching noise
- Event Detectors
- Bus hold
- Patented noise
